FAQ: Difference between revisions

From SciNet Users Documentation
Jump to navigation Jump to search
No edit summary
 
(147 intermediate revisions by 7 users not shown)
Line 1: Line 1:
__TOC__
__TOC__


 
==The Basics==x
==The Basics==
===Whom do I contact for support?===
===Whom do I contact for support?===


Whom do I contact if I have problems or questions about how to use the SciNet systems?
Whom do I contact if I have problems or questions about how to use the SciNet systems?
'''Answer:'''


E-mail [mailto:support@scinet.utoronto.ca <support@scinet.utoronto.ca>]   
E-mail [mailto:support@scinet.utoronto.ca <support@scinet.utoronto.ca>]   
Line 14: Line 11:


* your username on SciNet
* your username on SciNet
* the cluster that your question pertains to (NIA, BGQ, GPU, ...; SciNet is not a cluster!),
* the cluster that your question pertains to (Trillium, Trillium-GPU, Balam, ...; SciNet is not a cluster!),
* any relevant error messages
* any relevant error messages
* the commands you typed before the errors occurred
* the commands you typed before the errors occurred
Line 27: Line 24:
Avoid sending email only to specific individuals at SciNet. Your chances of a quick reply increase significantly if you email our team! (support@scinet.utoronto.ca)
Avoid sending email only to specific individuals at SciNet. Your chances of a quick reply increase significantly if you email our team! (support@scinet.utoronto.ca)


===What does ''code scaling'' mean?===
You can also ask the [https://chatbot.scinet.utoronto.ca SciNet Chatbot].  It can search the SciNet and Alliance documentation, check your own allocations, quotas, and jobs, and send a support ticket with the conversation attached.  Do not paste passwords, SSH private keys, or other secrets into the chat.


'''Answer:'''
===I have a CCDB account, but I can't login to Trillium.  How can I get access?===


Please see [[Introduction_To_Performance#Parallel_Speedup|A Performance Primer]]
If you have an active CCDB/Alliance account but you do not have access to Trillium yet, go to the [https://ccdb.alliancecan.ca/me/access_systems opt-in page on the CCDB site].  After requesting access, it usually takes only one or two business days for access to be granted.


===What do you mean by ''throughput''?===
===How can I reset the password for my {{Alliance}} account?===


'''Answer:'''
You can reset your password for your {{Alliance}} account here:


Please see [[Introduction_To_Performance#Throughput|A Performance Primer]].
https://ccdb.alliancecan.ca/security/forgot


Here is a simple example:
===How can I change or reset the password for my SciNet account?===
 
Suppose you need to do 10 computations.  Say each of these runs for
1 day on 8 cores, but they take "only" 18 hours on 16 cores.  What is the
fastest way to get all 10 computations done - as 8-core jobs or as
16-core jobs?  Let us assume you have 2 nodes at your disposal.
The answer, after some simple arithmetic, is that running your 10
jobs as 8-core jobs will take 5 days, whereas if you ran them
as 16-core jobs it would take 7.5 days.  Take your own conclusions...
 
===I changed my .bashrc/.bash_profile and now nothing works===


The default startup scripts provided by SciNet, and guidelines for them, can be found [[Important_.bashrc_guidelines|here]].  Certain things - like sourcing <tt>/etc/profile</tt>
To reset your password at SciNet please go to [https://portal.scinet.utoronto.ca/password_resets Password reset page]. Note that SciNet accounts are only necessary for non-Alliance resources, such as those of SOSCIP.
and <tt>/etc/bashrc</tt> are ''required'' for various SciNet routines to work! 
 
If the situation is so bad that you cannot even log in, please send email [mailto:support@scinet.utoronto.ca support].
 
===Could I have my login shell changed to (t)csh?===
 
The login shell used on our systems is bash. While the tcsh is available on the GPC and the TCS, we do not support it as the default login shell at present.  So "chsh" will not work, but you can always run tcsh interactively. Also, csh scripts will be executed correctly provided that they have the correct "shebang" <tt>#!/bin/tcsh</tt> at the top.
 
===How can I run Matlab / IDL / Gaussian / my favourite commercial software at SciNet?===
 
'''Answer:'''
 
Because SciNet serves such a disparate group of user communities, there is just no way we can buy licenses for everyone's commercial package.   The only commercial software we have purchased is that which in principle can benefit everyone -- fast compilers and math libraries (Intel's on GPC, and IBM's on TCS).
 
If your research group requires a commercial package that you already have or are willing to buy licenses for, contact us at [mailto:support@scinet.utoronto.ca support@scinet] and we can work together to find out if it is feasible to implement the packages licensing arrangement on the SciNet clusters, and if so, what is the the best way to do it.
 
Note that it is important that you contact us before installing commercially licensed software on SciNet machines, even if you have a way to do it in your own directory without requiring sysadmin intervention.  It puts us in a very awkward position if someone is found to be running unlicensed or invalidly licensed software on our systems, so we need to be aware of what is being installed where.


== Connecting to Trillium ==
===Do you have a recommended ssh program that will allow scinet access from Windows machines?===
===Do you have a recommended ssh program that will allow scinet access from Windows machines?===


'''Answer:'''
The Windows SSH programs we recommend are:
 
The [[Ssh#SSH_for_Windows_Users | SSH for Windows users]] programs we recommend are:
 
* [http://mobaxterm.mobatek.net/en/ MobaXterm] is a tabbed ssh client with some Cygwin tools, including ssh and X, all wrapped up into one executable.
* [http://mobaxterm.mobatek.net/en/ MobaXterm] is a tabbed ssh client with some Cygwin tools, including ssh and X, all wrapped up into one executable.
* [https://git-scm.com/downloads Git Bash] is an implementation of git which comes with a terminal emulator.
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]  - this is a terminal for windows that connects via ssh.  It is a quick install and will get you up and running quickly.<br/> '''WARNING:''' Make sure you download putty from the official website, because there are "trojanized" versions of putty around that will send your login information to a site in Russia (as reported [http://blogs.cisco.com/security/trojanized-putty-software here]).<br>To set up your passphrase protected ssh key with putty, see [http://the.earth.li/~sgtatham/putty/0.61/htmldoc/Chapter8.html#pubkey here].
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]  - this is a terminal for windows that connects via ssh.  It is a quick install and will get you up and running quickly.<br/> '''WARNING:''' Make sure you download putty from the official website, because there are "trojanized" versions of putty around that will send your login information to a site in Russia (as reported [http://blogs.cisco.com/security/trojanized-putty-software here]).<br>To set up your passphrase protected ssh key with putty, see [http://the.earth.li/~sgtatham/putty/0.61/htmldoc/Chapter8.html#pubkey here].
* [http://www.cygwin.com/ CygWin] - this is a whole linux-like environment for windows, which also includes an X window server so that you can display remote windows on your desktop.  Make sure you include the openssh and X window system in the installation for full functionality.  This is recommended if you will be doing a lot of work on Linux machines, as it makes a very similar environment available on your computer.<br>To set up your ssh keys, following the Linux instruction on the [[Ssh keys]] page.
* [http://www.cygwin.com/ CygWin] - this is a whole linux-like environment for windows, which also includes an X window server so that you can display remote windows on your desktop.  Make sure you include the openssh and X window system in the installation for full functionality.  This is recommended if you will be doing a lot of work on Linux machines, as it makes a very similar environment available on your computer.
<br>To set up your ssh keys, following the Linux instruction on the [[Ssh keys]] page.
 
To set up your ssh keys, follow the Linux instructions in the [https://docs.alliancecan.ca/wiki/SSH_Keys SSH keys] page.


===My ssh key does not work! WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! ===
===My ssh key does not work! WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! ===


'''Answer:'''
If this doesn't work, contact [mailto:support@scinet.utoronto.ca support@scinet.utoronto.ca] and investigate the problem. For example, if during a login session you get an message similar to the one below, just follow the instruction and delete the offending key on line 3 (you can use vi to jump to that line with ESC plus : plus 3). That only means that you may have logged in from your home computer to SciNet in the past, and that key is obsolete.
 
[[Ssh_keys#Testing_Your_Key | Testing Your Key]]
 
* If this doesn't work, you should be able to login using your password, and investigate the problem. For example, if during a login session you get an message similar to the one below, just follow the instruction and delete the offending key on line 3 (you can use vi to jump to that line with ESC plus : plus 3). That only means that you may have logged in from your home computer to SciNet in the past, and that key is obsolete.
<pre>
<pre>
$ ssh USERNAME@login.scinet.utoronto.ca
$ ssh USERNAME@trillium.scinet.utoronto.ca


@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Line 104: Line 70:
this message.
this message.
Offending key in /home/<user>/.ssh/known_hosts:3
Offending key in /home/<user>/.ssh/known_hosts:3
RSA host key for login.scinet.utoronto.ca  
RSA host key for trillium.scinet.utoronto.ca  
<http://login.scinet.utoronto.ca <http://login.scinet.utoronto.ca>> has
<http://trillium.scinet.utoronto.ca <http://trillium.scinet.utoronto.ca>> has
changed and you have requested
changed and you have requested
</pre>
* If you get the message below you may need to logout of your gnome session and log back in since the ssh-agent needs to be
restarted with the new passphrase ssh key.
<pre>
$ ssh USERNAME@login.scinet.utoronto.ca
Agent admitted failure to sign using the key.
</pre>
</pre>


Line 148: Line 106:
This very likely means that ssh/xauth can't update your ${HOME}/.Xauthority file.  
This very likely means that ssh/xauth can't update your ${HOME}/.Xauthority file.  


The simplest pssible reason for this is that you've filled your 10GB /home quota and so can't write anything to your home directory.  Use
The simplest possible reason for this is that you've filled your 100GB /home quota and so can't write anything to your home directory.  Use


<pre>
<pre>
$ module load extras
$ diskUsage
$ diskUsage
</pre>  
</pre>  
Line 158: Line 115:


Alternately, this could mean your .Xauthority file has become broken/corrupted/confused some how, in which case you can delete that file, and when you next log in you'll get a similar warning message involving creating .Xauthority, but things should work.
Alternately, this could mean your .Xauthority file has become broken/corrupted/confused some how, in which case you can delete that file, and when you next log in you'll get a similar warning message involving creating .Xauthority, but things should work.
===I have a CCDB account, but I can't login to SciNet. How can I get a SciNet account?===
'''Answer:'''
You must extend your CCDB application process to also get a SciNet account:
https://wiki.scinet.utoronto.ca/wiki/index.php/Application_Process
https://www.scinethpc.ca/getting-a-scinet-account/
===How can I reset the password for my Compute Canada account?===
'''Answer:'''
You can reset your password for your Compute Canada account here:
https://ccdb.computecanada.ca/security/forgot
===How can I change or reset the password for my SciNet account?===
'''Answer:'''
To reset your password at SciNet please go to [https://portal.scinet.utoronto.ca/password_resets Password reset page].
If you know your old password and want to change it, that can be done here after logging in on the portal:
https://portal.scinet.utoronto.ca


===Why am I getting the error "Permission denied (publickey,gssapi-with-mic,password)"?===
===Why am I getting the error "Permission denied (publickey,gssapi-with-mic,password)"?===


This error can pop up in a variety of situations: when trying to log in, or when after a job has finished, when the error and output files fail to be copied (there are other possible reasons for this failure as well -- see [[FAQ#My_GPC_job_died.2C_telling_me_.60Copy_Stageout_Files_Failed.27|My GPC job died, telling me:Copy Stageout Files Failed]]).
In most cases, the "Permission denied" error is caused by incorrect permission of the (hidden) .ssh directory. SSH is used for logging in as well as for the copying of the standard error and output files after a job.  
In most cases, the "Permission denioed" error is caused by incorrect permission of the (hidden) .ssh directory. Ssh is used for logging in as well as for the copying of the standard error and output files after a job.  


For security reasons,  
For security reasons, the directory .ssh should only be writable and readable to you, but yours has read permission for everybody, and thus it fails.  You can change this by
the directory .ssh should only be writable and readable to you, but yours  
has read permission for everybody, and thus it fails.  You can change  
this by
<pre>
<pre>
   chmod 700 ~/.ssh
   chmod 700 ~/.ssh
Line 206: Line 129:
</pre>
</pre>


===ERROR:102: Tcl command execution failed? when loading modules ===
=== How to use VNC to connect to Trillium? ===
Modules sometimes require other modules to be loaded first.
 
Module will let you know if you didn’t.
The use case is to start <tt>vncserver</tt> on a Trillium compute node and display it on your home computer. Compute nodes are not reachable from the internet, so you need SSH tunnelling through a login node. Compute nodes also mount <tt>$HOME</tt> read-only, so the VNC dot files must be moved to <tt>$SCRATCH</tt> and symlinked back.
For example:
<pre>
$ module purge
$ module load python
python/2.6.2(11):ERROR:151: Module ’python/2.6.2’ depends on one of the module(s) ’gcc/4.4.0’
python/2.6.2(11):ERROR:102: Tcl command execution failed: prereq gcc/4.4.0
$ gpc-f103n084-$ module load gcc python
$
</pre>


See [[VNC]] for the Trillium-specific recipe, and the [https://docs.alliancecan.ca/wiki/VNC Alliance VNC page] for client installation and general VNC usage.


== Environment ==


=== How do I compute the core-years usage of my code? ===
===I changed my .bashrc/.bash_profile and now nothing works===
 
The default startup scripts provided by SciNet, and guidelines for them, can be found [[Bashrc_guidelines|here]].  Certain things - like sourcing <tt>/etc/profile</tt>
and <tt>/etc/bashrc</tt> are ''required'' for various SciNet routines to work! 


The "core-years" quantity is a way to account for the time your code runs, by considering the total number of cores and time used, accounting for the total number of hours in a year.
If the situation is so bad that you cannot even log in, please send email [mailto:support@scinet.utoronto.ca support].
For instance if your code uses ''HH'' hours, in ''NN'' nodes, where each node has ''CC'' cores, then "core-years" can be computed as follow:


''HH*(NN*CC)/(365*24)''
===Could I have my login shell changed to (t)csh?===


If you have several independent instances (batches) running on different nodes, with ''BB'' number of batches and each batch during ''HH'' hours, then your core-years usage can be computed as,
The login shell used on our systems is bash. While the tcsh is available, we do not support it as the default login shell at present.  So "chsh" will not work, but you can always run tcsh interactively. Also, csh scripts will be executed correctly provided that they have the correct "shebang" <tt>#!/bin/tcsh</tt> at the top.


''BB*HH*(NN*CC)/(365*24)''
===Can I work in a Jupyter Notebook?===


As a general rule, in our GPC system, each node has only 8 cores, so ''CC'' will be always 8.
Yes.  Use [[Open OnDemand Quickstart|Open OnDemand]]; SciNet's standalone JupyterHub was superseded by Open OnDemand on April 1, 2025.


==Compiling your Code==
== Compiling your Code ==
<!--


===How can I get g77 to work?===
===How can I get g77 to work?===
Line 270: Line 189:
We ''emphasize'' that this is just a rough first guide, and that the compilers are still not magical!  For more sophisticated approaches to parallelizing your code, email us at [mailto:support@scinet.utoronto.ca <support@scinet.utoronto.ca>]  to set up an appointment with one
We ''emphasize'' that this is just a rough first guide, and that the compilers are still not magical!  For more sophisticated approaches to parallelizing your code, email us at [mailto:support@scinet.utoronto.ca <support@scinet.utoronto.ca>]  to set up an appointment with one
of our technical analysts.
of our technical analysts.
-->


===How do I link against the Intel Math Kernel Library?===
===How do I link against the Intel Math Kernel Library?===
Line 275: Line 195:
If you need to link to the Intel Math Kernal Library (MKL) with the intel compilers, just add the <pre>-mkl</pre> flag. There are in fact three flavours: <tt>-mkl=sequential</tt>, <tt>-mkl=parallel</tt> and <tt>-mkl=cluster</tt>, for the serial version, the threaded version and the mpi version, respectively. (Note: The cluster version is available only when using the intelmpi module and mpi compilation wrappers.)
If you need to link to the Intel Math Kernal Library (MKL) with the intel compilers, just add the <pre>-mkl</pre> flag. There are in fact three flavours: <tt>-mkl=sequential</tt>, <tt>-mkl=parallel</tt> and <tt>-mkl=cluster</tt>, for the serial version, the threaded version and the mpi version, respectively. (Note: The cluster version is available only when using the intelmpi module and mpi compilation wrappers.)


If you need to link in the Intel Math Kernel Library (MKL) libraries to gcc/gfortran/c++, you are well advised to use the Intel(R) Math Kernel Library Link Line Advisor: http://software.intel.com/en-us/articles/intel-mkl-link-line-advisor/ for help in devising the list of libraries to link with your code.
If you need to link in the Intel Math Kernel Library (MKL) libraries to gcc/gfortran/c++, you are well advised to use the [http://software.intel.com/en-us/articles/intel-mkl-link-line-advisor Intel(R) Math Kernel Library Link Line Advisor] for help in devising the list of libraries to link with your code.


'''''Note that this give the link line for the command line. When using this in Makefiles, replace $MKLPATH by ${MKLPATH}.'''''
'''''Note that this give the link line for the command line. When using this in Makefiles, replace $MKLPATH by ${MKLROOT}.'''''


'''''Note too that, unless the integer arguments you will be passing to the MKL libraries are actually 64-bit integers, rather than the normal int or INTEGER types, you want to specify 32-bit integers (lp64) .'''''
'''''Note too that, unless the integer arguments you will be passing to the MKL libraries are actually 64-bit integers, rather than the normal int or INTEGER types, you want to specify 32-bit integers (lp64) .'''''


===Can the compilers on the login nodes be disabled to prevent accidentally using them?===
<!--
 
'''Answer:'''
 
You can accomplish this by modifying your .bashrc to not load the compiler modules. See [[Important .bashrc guidelines]].


==="relocation truncated to fit: R_X86_64_PC32": Huh?===
==="relocation truncated to fit: R_X86_64_PC32": Huh?===
Line 315: Line 231:


You are trying to compile on the login nodes.  As described in the wiki ( https://support.scinet.utoronto.ca/wiki/index.php/GPC_Quickstart#Login ), or in the users guide you would have received with your account,  Scinet supports two main clusters, with very different architectures.  Compilation must be done on the development nodes of the appropriate cluster (in this case, gpc01-04).  Thus, log into gpc01, gpc02, gpc03, or gpc04, and compile from there.
You are trying to compile on the login nodes.  As described in the wiki ( https://support.scinet.utoronto.ca/wiki/index.php/GPC_Quickstart#Login ), or in the users guide you would have received with your account,  Scinet supports two main clusters, with very different architectures.  Compilation must be done on the development nodes of the appropriate cluster (in this case, gpc01-04).  Thus, log into gpc01, gpc02, gpc03, or gpc04, and compile from there.
-->


==Testing your Code==
==Testing your Code==


=== Can I run a something for a short time on the development nodes? ===
===How can I run MATLAB / IDL / Gaussian / my favourite commercial software at SciNet?===


I am in the process of playing around with the mpi calls in my code to get it to work. I do a lot of tests and each of them takes a couple of seconds only. Can I do this on the development nodes?
Because SciNet serves such a disparate group of user communities, there is just no way we can buy licences for everyone's commercial package.  The only commercial software we have purchased is that which in principle can benefit everyone -- fast compilers and math libraries.


'''Answer:'''
If your research group requires a commercial package that you already have or are willing to buy licences for, contact us at [mailto:support@scinet.utoronto.ca support@scinet] and we can work together to find out if it is feasible to implement the package's licensing arrangement on the SciNet clusters, and if so, what is the the best way to do it.  Several commercial packages have already been installed, you can see the list [[Commercial_software | here]].


Yes, as long as it's very brief (a few minutes).  People use the development nodes
Note that it is important that you contact us before installing commercially licensed software on SciNet machines, even if you have a way to do it in your own directory without requiring sysadmin intervention.  It puts us in a very awkward position if someone is found to be running unlicensed or invalidly licensed software on our systems, so we need to be aware of what is being installed where.
for their work, and you don't want to bog it down for people, and testing a real
code can chew up a lot more resources than compiling, etc.    The procedures differ
depending on what machine you're using.


==== TCS ====
Also note that MATLAB is somewhat of a special case.  See the [[MATLAB]] page for more information.


On the TCS you can run small MPI jobs on the tcs02 node, which is meant for  
=== Can I run a something for a short time on the login nodes? ===
development use.  But even for this test run on one node, you'll need a host file --
a list of hosts (in this case, all tcs-f11n06, which is the `real' name of tcs02)
that the job will run on.  Create a file called `hostfile' containing the following:


  tcs-f11n06
I am in the process of playing around with the MPI calls in my code to get it to work. I do a lot of tests and each of them takes a couple of seconds only. Can I do this on the login nodes?
tcs-f11n06
tcs-f11n06
tcs-f11n06


for a 4-task run.  When you invoke "poe" or "mpirun", there are runtime
'''Answer:'''
arguments that you specify pointing to this file.  You can also specify it
in an environment variable MP_HOSTFILE, so, if your file is in your /scratch directory, say
${SCRATCH}/hostfile, then you would do


<pre>
Yes, as long as it's very brief (a few minutes).  People use the login nodes for their work, and you don't want to bog it down.  Testing a real code can chew up a lot more resources than compiling, etc.
export MP_HOSTFILE=${SCRATCH}/hostfile
 
</pre>
Once you have run some short test jobs, you should run an [https://docs.alliancecan.ca/wiki/Running_jobs#Interactive_jobs interactive] job and run the tests either in the regular compute queue or using the debug queue that is reserved for this purpose.


in your shell.  You will also need to create a <tt>.rhosts</tt> file in your
=== How do I run a longer (but still shorter than an hour) test job quickly ? ===
home director, again listing <tt>tcs-f11n06</tt> so that <tt>poe</tt>
can start jobs.  After that you can simply run your program.  You can use
mpiexec:


There is a high turnover short queue called [https://docs.alliancecan.ca/wiki/Trillium_Quickstart#Partitions_and_limits debug] that is designed for this purpose.  You can use it by adding
<pre>
<pre>
mpiexec -n 4 my_test_program
#SBATCH -p debug
</pre>
</pre>
to your submission script.  This is for testing you code only; do not use the debug queue for production runs.


adding <tt> -hostfile /path/to/my/hostfile</tt> if you did not set the environment
===What does ''code scaling'' mean?===
variable above.  Alternatively, you can run it with the poe command (do a "man poe" for details), or even by
just directly running it.  In this case the number of MPI processes will by default
be the number of entries in your hostfile.


Please see [[Introduction_To_Performance#Parallel_Speedup|A Performance Primer]]


==== GPC ====
===What do you mean by ''throughput''?===


On the GPC one can run short test jobs on the GPC [[GPC_Quickstart#Compile.2FDevel_Nodes | development nodes ]]<tt>gpc01</tt>..<tt>gpc04</tt>;
Please see [[Introduction_To_Performance#Throughput|A Performance Primer]].
if they are single-node jobs (which they should be) they don't need a hostfile.  Even better, though, is to request an [[ Moab#Interactive | interactive ]] job and run the tests either in regular batch queue or using a short high availability [[ Moab#debug | debug ]] queue that is reserved for this purpose.


=== How do I run a longer (but still shorter than an hour) test job quickly ? ===
Here is a simple example:


'''Answer'''
Suppose you need to do 10 computations.  Say each of these runs for 1 day on 1 node (192 cores), but they take "only" 18 hours on 2 nodes (384 cores).  What is the fastest way to get all 10 computations done - as single-node jobs or as two-node jobs?  Let us assume you have 2 nodes at your disposal. The answer, after some simple arithmetic, is that running your 10 jobs as single-node jobs will take 5 days, whereas if you ran them as two-node jobs it would take 7.5 days.  Draw your own conclusions...
 
On the GPC there is a high turnover short queue called [[ Moab#debug | debug ]] that is designed for
this purpose.  You can use it by adding
<pre>
#PBS -q debug
</pre>
to your submission script.


==Submitting your jobs==
==Submitting your jobs==
===Error Submitting My Job: qsub: Bad UID for job execution MSG=ruserok failed ===
I write up a submission script as in the examples, but when I attempt to submit the job, I get the above error.  What's wrong?
'''Answer:'''
This error will occur if you try to submit a job from the login nodes.  The login nodes are the gateway to all of SciNet's systems (GPC, TCS, P7, ARC), which have different hardware and queueing systems.  To submit a job, you must log into a development node for the particular cluster you are submitting to and submit from there.


=== How do I charge jobs to my RAC allocation? ===
=== How do I charge jobs to my RAC allocation? ===


'''Answer:'''
Please see the [https://docs.alliancecan.ca/wiki/Running_jobs#Accounts_and_projects accounting section of the Running jobs page].
 
Please see the [[Moab#Accounting|accounting section of Moab page]].
 


===How can I automatically resubmit a job?===
===How can I automatically resubmit a job?===


Commonly you may have a job that you know will take longer to run than what is  
Commonly you may have a job that you know will take longer to run than what is permissible in the queue.  As long as your program contains [[Checkpoints|checkpoint]] or restart capability, you can have one job automatically submit the next. In the following example it is assumed that the program finishes before the 24 hour limit and then resubmits itself by logging into one of the login nodes.
permissible in the queue.  As long as your program contains [[Checkpoints|checkpoint]] or  
restart capability, you can have one job automatically submit the next. In
the following example it is assumed that the program finishes before  
the 48 hour limit and then resubmits itself by logging into one
of the development nodes.


<source lang="bash">
<source lang="bash">
#!/bin/bash
#!/bin/bash
# MOAB/Torque example submission script for auto resubmission
# SciNet GPC
#
#
#PBS -l nodes=1:ppn=8,walltime=48:00:00
#SBATCH --nodes=1
#PBS -N my_job
#SBATCH --time=24:00:00
 
#SBATCH --job-name my_job
# DIRECTORY TO RUN - $PBS_O_WORKDIR is directory job was submitted from
cd $PBS_O_WORKDIR


# YOUR CODE HERE
# YOUR CODE HERE
./run_my_code
./run_my_code


# RESUBMIT 10 TIMES HERE
# RESUBMIT UNTIL RUN 10 TIMES
num=$NUM
let ${NUM:=1}  # if undefined, defaults NUM to 1
if [ "$num" -lt 10 ]; then
if (( NUM++ < 10 )); then
      num=$(($num+1))
       ssh -t tri-login01 "cd $SLURM_SUBMIT_DIR" \; "sbatch --export=NUM=$NUM script_name.sh"
       ssh gpc01 "cd $PBS_O_WORKDIR; qsub ./script_name.sh -v NUM=$num";
fi
fi
</source>
</source>


<pre>
<pre>
qsub script_name.sh -v NUM=0
sbatch script_name.sh  
</pre>
</pre>


You can alternatively use [[ Moab#Job_Dependencies | Job dependencies ]] through the queuing system which will not start one job until another job has completed.
You can alternatively use [https://slurm.schedmd.com/sbatch.html#OPT_dependency Job dependencies] through the queuing system which will not start one job until another job has completed.


If your job can't be made to automatically stop before the 48 hour queue window, but it does write out checkpoints, you can use the timeout command to stop the program while you still have time to resubmit; for instance
If your job can't be made to automatically stop before the 24 hour queue window, but it does write out checkpoints, you can use the timeout command to stop the program while you still have time to resubmit; for instance


<source lang="bash">
<source lang="bash">
     timeout 2850m ./run_my_code argument1 argument2
     timeout 1410m ./run_my_code argument1 argument2
</source>
</source>


will run the program for 47.5 hours (2850 minutes), and then send it SIGTERM to exit the program.
will run the program for 23.5 hours (1410 minutes), and then send it SIGTERM to exit the program.


===How can I pass in arguments to my submission script?===
===How can I pass in arguments to my submission script?===


If you wish to make your scripts more generic you can use qsub's ability  
If you wish to make your scripts more generic you can use SLURM's ability to pass in environment variables to pass in arguments to your script. See [[Trillium_Quickstart#Passing_Variables_to_submission_scripts | this page]].
to pass in environment variables to pass in arguments to your script.
The following example shows a case where an input and an output
file are passed in on the qsub line. Multiple variables can be
passed in using the qsub "-v" option and comma delimited.  


<source lang="bash">
== Scheduling and Priority ==
#!/bin/bash
# MOAB/Torque example of passing in arguments
# SciNet GPC
#
#PBS -l nodes=1:ppn=8,walltime=48:00:00
#PBS -N my_job


# DIRECTORY TO RUN - $PBS_O_WORKDIR is directory job was submitted from
=== Why did <code>squeue --start</code> say it would take 3 hours for my job to start before, and now it says my job will start in 10 hours? ===
cd $PBS_O_WORKDIR


# YOUR CODE HERE
Please look at the [[FAQ#How_do_priorities_work.2Fwhy_did_that_job_jump_ahead_of_mine_in_the_queue.3F | How do priorities work/why did that job jump ahead of mine in the queue? ]] page.
./run_my_code -f $INFILE -o $OUTFILE
</source>


<pre>
===How do priorities work/why did that job jump ahead of mine in the queue?===
qsub script_name.sh -v INFILE=input.txt,OUTFILE=outfile.txt
</pre>


The [https://docs.alliancecan.ca/wiki/Running_jobs queueing system] used on SciNet machines is a [http://en.wikipedia.org/wiki/Priority_queue Priority Queue].  Jobs enter the queue at the back of the queue, and slowly make their way to the front as those ahead of them are run; but a job that enters the queue with a higher priority can `cut in line'.


===I submit my GPC job, and I get an email saying it was rejected===
The main factor which determines priority is whether or not the user belongs to a group(PI) who has a [https://www.alliancecan.ca/research-portal/accessing-resources/resource-allocation-competitions {{Alliance}} RAC allocation].  These are competitively allocated grants of computer time; there is a call for proposals in the fall of every calendar year.  Users in groups with an allocation have higher priorities in an attempt to make sure that they can use the amount of computer time the committees granted them.  Their priority decreases as they approach their allotted usage over the current window of time; by the time that they have exhausted that allotted usage, their priority is the same as users in groups with no allocation ("RAS", or `default' users).  Default groups (hence users with these groups) share a fixed, low, priority.
'''Answer:'''


This happens because the job you've submitted breaks one of the rules of the queues and is rejected. An email
This priority system is called `fairshare'; the scheduler attempts to make sure everyone has their fair share of the machines, where the share that's fair has been determined by the allocation committee.   The fairshare window is a rolling window of one week; that is, any time you have a job in the queue, the fairshare calculation of its priority is given by how much of your allocation of the machine has been used in the last 7 days.
is sent with the JOBID, JOBNAME, and the reason it was rejected. The following is an example where a job
requests more than 48 hours and was rejected.


<pre>
A particular allocation might have some fraction of Trillium - say 1% of the machine (if the PI had been allocated 2400 core-years on Trillium). The allocations have labels; (called `Resource Allocation Proposal Identifiers', or RAPIs) they look something like
PBS Job Id: 3462493.gpc-sched
Job Name:  STDIN
job deleted
Job deleted at request of root@gpc-sched
MOAB_INFO:  job was rejected - job violates class configuration 'wclimit too high for class 'batch_ib' (345600 > 172800)'
</pre>


Jobs on the TCS or GPC may only run for 48 hours at a time; this restriction greatly increases responsiveness of the queue and queue throughput for all our users.  If your computation requires longer than that, as many do, you will have to [[ Checkpoints | checkpoint ]] your job and restart it after each 48-hour queue window.  You can manually re-submit jobs, or if you can have your job cleanly exit before the 48 hour window, there are ways to [[ FAQ#How_can_I_automatically_resubmit_a_job.3F | automatically resubmit jobs ]].
  rrg-abc-ab


Other rejections return a more cryptic error saying "job violates class configuration" such as follows:
where rrg (or rpp) indicates an allocation, abc is the group name, and the suffix specifies which of the allocations granted to the PI is to be used.  These can be specified on a job-by-job basis.  On Trillium, one adds the line
<pre>
#SBATCH -A RAPI
PBS Job Id: 3462409.gpc-sched
to your script. If the allocation to charge isn't specified, a default is used; each user has such a default, which can be changed at the [https://portal.scinet.utoronto.ca SciNet portal] where one changes one's password.
Job Name:  STDIN
job deleted
Job deleted at request of root@gpc-sched
MOAB_INFO:  job was rejected - job violates class configuration 'user required by class 'batch''
</pre>


The most common problems that result in this error are:
A job's priority is determined primarily by the fairshare priority of the allocation it is being charged to; the previous 7 days worth of use under that allocation is calculated and compared to the allocated fraction (here, 1%) of the machine over that window (here, 7 days).  The fairshare priority is a decreasing function of the allocation left; if there is no allocation left (eg, jobs running under that allocation have already used 403,200 CPU hours (2400 cores x 7 days x 24 hours) in the past 7 days), the priority is the same as that of a user with no granted allocation.  (This last part has been the topic of some debate; as the machine gets more utilized, it will probably be the case that we allow users in RAC groups who have greatly overused their quota to have their priorities to drop below that of unallocated groups, to give the unallocated group some chance to run on our increasingly crowded system; this would have no undue effect on our allocated groups as they still would be able to use the amount of resources they had been allocated by the committees.)  Note that all jobs charging the same allocation get the same fairshare priority.


* '''Incorrect number of processors per node''': Jobs on the GPC are scheduled per-node not per-core and since each node has 8 processor cores (ppn=8) the smallest job allowed is one node with 8 cores (nodes=1:ppn=8). For serial jobs users must bundle or batch them together in groups of 8. See [[ FAQ#How_do_I_run_serial_jobs_on_GPC.3F | How do I run serial jobs on GPC? ]]
There are other factors that go into calculating priority, but fairshare is the most significant.   Other factors include
* '''No number of nodes specified''': Jobs submitted to the main queue must request a specific number of nodes, either in the submission script (with a line like <tt>#PBS -l nodes=2:ppn=8</tt>) or on the command line (eg, <tt>qsub -l nodes=2:ppn=8,walltime=5:00:00 script.pbs</tt>).  Note that for the debug queue, you can get away without specifying a number of nodes and a default of one will be assigned; for both technical and policy reasons, we do not enforce such a default for the main ("batch") queue.
* length of time waiting in queue (measured in units of the requested runtime). A waiting queue job gains priority as it sits in the queue to avoid job starvation.  
* '''There is a 15 minute walltime minimum''' on all queues except debug and if you set your walltime less than this, it will be rejected.
* User adjustment of priorities ( See below ).


The major effect of these subdominant terms is to shuffle the order of jobs running under the same allocation.


===How do we manage job priorities within our research group?===


=== When submitting your job, fails saying: "script is written in DOS/Windows text format" ===
Obviously, managing shared resources within a large group - whether it is conference funding or CPU time - takes some doing.  
 
'''Answer:'''
 
Very likely you have written your script in a windows machine, so to fix this you just need to change the format of you submission script to unix from Windows/DOS.
Use the command below for all your script files:


<pre>
It's important to note that the fairshare periods are intentionally kept quite short - just one week long. So, for example, let us say that in your resource allocation you have about 10% of the machine.  Then for someone to use up the whole one week amount of time in one day, he'd have to use 70% of the machine in that one day - which is unlikely to happen by accident.  If that does happen, those using the same allocation as the person who used 70% of the machine over the one day will suffer by having much lower priority for their jobs, but only for the next 6 days - and even then, if there are idle CPUs they'll still be able to compute.
dos2unix <pbs-script-file>
</pre>


where <pbs-script-file> has to be substituted by the name of your script file.
There are online tools, both the [https://ccdb.alliancecan.ca CCDB] and [https://my.scinet.utoronto.ca my.SciNet], for seeing how the allocation is being used, and those people who are in charge in your group will be able to use that information to manage users, telling them to dial it down or up.  We know that managing a large research group is hard, and we want to make sure we provide you the information you need to do your job effectively.


==Running your jobs==
<!-- One way for users within a group to manage their priorities within the group is with [[Moab#Adjusting_Job_Priority | user-adjusted priorities]]; this is described in more detail on the [[Moab | Scheduling System]] page. -->


===My job can't write to /home===


My code works fine when I test on the development nodes, but when I submit a job, or even run interactively in the development queue on GPC, it fails.  What's wrong?
===When my job will be executed? "sinfo" shows that some nodes are idle but my job still does not get executed===
The answer to your question is not easy, because the scheduler is a dynamic system. There
are 2 main factors contributing to this lack of accuracy as to WHEN the job will start,
among others:


'''Answer:'''
1) suppose you issue a query, and it tells your job will start in 6 hours;
However, if in the meantime a couple of users with higher priority than you submit some
jobs, they will jump the line and start ahead of yours, therefore all of the sudden
increasing your wait time to 10 or 20 hours. This is not a bad thing. This is exactly how
fairshare is expected to work, and you should not get surprised or upset. Without an
allocation there will always be somebody with higher priority than you that can come in
at anytime and "ruin" your day. On the other hand, in all fairness, the longer your job
remains on the queue the higher your priority becomes, up to a point in which it doesn't
matter if the King of the Universe shows up, your job will start.


As [[Data_Management#Home_Disk_Space | discussed]] [https://support.scinet.utoronto.ca/wiki/images/5/54/SciNet_Tutorial.pdf elsewhere], <tt>/home</tt> is mounted read-only on the compute nodes; you can only write to <tt>/home</tt> from the login nodes and devel nodes. (The [[GPC_Quickstart#128Glargemem | largemem nodes]] on GPC, in this respect, are more like devel nodes than compute nodes).  In general, to run jobs you can read from <tt>/home</tt> but you'll have to write to <tt>/scratch</tt> (or, if you were allocated space through the RAC process, on <tt>/project</tt>).  More information on SciNet filesytems can be found on our [[Data_Management | Data Management]] page.
2) The other factor is that many people don't take the time to make a better estimate of
how long it takes to execute their jobs. A good practice is to keep track of how long it took
the last time for similar jobs, and add 20-30% on the request time for the next
submission, just in case. However many people just send the jobs for maximum 24 hours (we
have no control over this, despite our education efforts), and the scheduler has no way
to know if the job will finish sooner, so it uses the 24 hours to estimate WHEN your job
will start. But as you can imagine, many jobs will end sooner, so in all fairness, the
scheduler will immediately move the line along, and this will favor every one, including
you, and with this new information, if you query again it may tell you that your job will
start in 2 hours or 30 minutes, instead of 6 hours.


===OpenMP on the TCS===
As for your question about seeing idle nodes with "sinfo", and your job not starting:
That is because those nodes are not there for you, pure and simple. They are idle because
they are being held for those jobs with higher priority, some of them requiring 100 or
500 nodes for instance. Until that count is accumulated, they will sit idle, until the
higher priority job starts. A clever user such as yourself, having asked us about this
dynamic, may take advantage of the situation, by submitting jobs of 1 hour or 5 hours,
and squeeze in those gaps. That is called '''backfill''', and we have users that have become
masters on this art, milking everything they can from the system.


How do I run an OpenMP job on the TCS?
Bottom line, the ''time to start'' will give you more of an order of magnitude as to when your
job will be executed: in 50 hours or 5 hours? and you do the best with that information.


'''Answer:'''
Regardless, the best is to always keep jobs on the queue, so they accrue priority over
time, and don't ask for 24 hours if you know your job will only take 10 hours to finish.


Please look at the [[TCS_Quickstart#Submission_Script_for_an_OpenMP_Job | TCS Quickstart ]] page.


===Can I can use hybrid codes consisting of MPI and openMP on the GPC?===
===My resource group has a default allocation of ~52 cores. What does this exactly mean? Does this imply that my group can use on average 52 cores per rolling week without losing priority?===


'''Answer:'''
~52 cores means your group's avg daily allowance for the whole year, sustained. Users within your group may slice and dice that in many different ways. For instance:


Yes. Please look at the [[GPC_Quickstart#Hybrid_MPI.2FOpenMP_jobs | GPC Quickstart ]] page.
* 1 job of 6.5 hours on 1 node ==> 1*6.5*192 = 1248 = 52*24
* 2 jobs of 3.25 hours on 1 node ==> 2*3.25*192 = 1248 = 52*24


===How do I run serial jobs on GPC?===
Your whole group combined can do this every day of the year, and your priority won't be reduced. In fact, if you submit many smaller jobs in any dimension (1 hour and/or 1 node) and you keep them on the queue most of the time you will likely milk more than ~52/day out of the system, by taking advantage of back-fill opportunities.


'''Answer''':
On the other hand, there will be times in which an user in the group may need to run a much larger job than the groups daily allowance. The scheduler will accommodate that for the first time around. For instance:


So it should be said first that SciNet is a parallel computing resource,
* 1 job of 24 hours on 2 nodes ==> 1*24*2*192 = 9216 = <b>~7.4</b>*(52*24)
and our priority will always be parallel jobs.  Having said that, if
you can make efficient use of the resources using serial jobs and get
good science done, that's good too, and we're happy to help you.


The GPC nodes each have 8 processing cores, and making efficient use of these
that is over 7 times the daily allowance for the group. Consequently, once the job starts the priority for everyone else in the group will fall, quite a lot in fact, and the next job from anybody in the group, including the original submitter, may have to wait a whole week before it runs again. In another words, the scheduler acts in a very fair manner to ensure it tracks and maintains that ~52 cores daily average over time.
nodes means using all eight cores.  As a result, we'd like to have the
users take up whole nodes (eg, run multiples of 8 jobs) at a time.


It depends on the nature of your job what the best strategy is. Several approaches are presented on the [[User_Serial|serial run wiki page]].
==Running your jobs==


===Why can't I request only a single cpu for my job on GPC?===
===My job can't write to /home===
 
'''Answer''':
 
On GPC, computers are allocated by the node - that is, in chunks of 8 processors.  If you want to run a job that requires only one processor, you need to bundle the jobs into groups of 8, so as to not be wasting the other 7 for 48 hours. See [[User_Serial|serial run wiki page]].
 
===How do I run serial jobs on TCS?===
 
'''Answer''': You don't.
 
 
===But in the queue I found a user who is running jobs on GPC, each of which is using only one processor, so why can't I?===
 
'''Answer''':
 
The pradat* and atlaspt* jobs, amongst others, are jobs of the ATLAS high energy physics project. That they are reported as single cpu jobs is an artifact of the moab scheduler. They are in fact being automatically bundled into 8-job bundles but have to run individually to be compatible with their international grid-based systems.
 
===How do I use the ramdisk on GPC?===
 
To use the ramdisk, create and read to / write from files in /dev/shm/.. just as one would to (eg) ${SCRATCH}. Only the amount of RAM needed to store the files will be taken up by the temporary file system; thus if you have 8 serial jobs each requiring 1 GB of RAM, and 1GB is taken up by various OS services, you would still have approximately 7GB available to use as ramdisk on a 16GB node. However, if you were to write 8 GB of data to the RAM disk, this would exceed available memory and your job would likely crash.
 
It is very important to delete your files from ram disk at the end of your job. If you do not do this, the next user to use that node will have less RAM available than they might expect, and this might kill their jobs.
 
''More details on how to setup your script to use the ramdisk can be found on the [[User_Ramdisk|Ramdisk wiki page]].''


 
My code works fine when I test on the Trillium login nodes, but when I submit a job it fails.  What's wrong?
=== How can I run a job longer than 48 hours? ===


'''Answer:'''
'''Answer:'''


The SciNet queues have a queue limit of 48 hours.  This is pretty typical for systems of its size in Canada and elsewhere, and larger systems commonly have shorter limits.  The limits are there to ensure that every user gets a fair share of the system (so that no one user ties up lots of nodes for a long time), and for safety (so that if one memory board in one node fails in the middle of a very long job, you haven't lost a months' worth of work).
As [[Trillium_Quickstart#Data_Management | discussed elsewhere]], <tt>/home</tt> is mounted read-only on the compute nodes; you can only write to <tt>/home</tt> from the login nodes.  In general, to run jobs you can read from <tt>/home</tt> but you'll have to write to <tt>/scratch</tt> (or, if you were allocated space through the RAC process, on <tt>/project</tt>).  More information on SciNet filesystems can be found on our [[Data_Management | Data Management]] page.


Since many of us have simulations that require more than that much time, most widely-used scientific applications have "checkpoint-restart" functionality, where every so often the complete state of the calculation is stored as a checkpoint file, and one can restart a simulation from one of these.  In fact, these restart files tend to be quite useful for a number of purposes.
===Can I can use hybrid codes consisting of MPI and openMP ?===


If your job will take longer, you will have to submit your job in multiple parts, restarting from a checkpoint each time. In this way, one can run a simulation much longer than the queue limit.  In fact, one can even write job scripts which automatically re-submit themselves until a run is completed, using [[FAQ#How_can_I_automatically_resubmit_a_job.3F | automatic resubmission. ]]
Yes.


=== Why did showstart say it would take 3 hours for my job to start before, and now it says my job will start in 10 hours? ===
===How do I run serial jobs?===


'''Answer:'''
Trillium is a parallel computing resource, and SciNet's priority will always be parallel jobs.  Having said that, if you can make efficient use of the resources using serial jobs and get good science done, that's good too, and we're happy to help you.


Please look at the [[FAQ#How_do_priorities_work.2Fwhy_did_that_job_jump_ahead_of_mine_in_the_queue.3F | How do priorities work/why did that job jump ahead of mine in the queue? ]] page.
The Trillium CPU nodes each have 192 processing cores, and making efficient use of these nodes means using all 192 cores. As a result, serial work should be bundled so that each node is fully used.


===How do priorities work/why did that job jump ahead of mine in the queue?===
It depends on the nature of your job what the best strategy is. Several approaches are presented in the [https://docs.alliancecan.ca/wiki/Running_jobs#Serial_job serial job examples].


'''Answer:'''
===Why can't I request only a single cpu for my job on Trillium?===


The [[Moab | queueing system]] used on SciNet machines is a [http://en.wikipedia.org/wiki/Priority_queue Priority Queue].  Jobs enter the queue at the back of the queue, and slowly make their way to the front as those ahead of them are run; but a job that enters the queue with a higher priority can `cut in line'.
On Trillium, CPU jobs are allocated by whole node - that is, in chunks of 192 processors.  If you want to run a job that requires only one processor, you need to bundle the jobs into groups of 192, so as to not be wasting the other 191 cores. See the [https://docs.alliancecan.ca/wiki/Running_jobs#Serial_job serial job examples] for more information on how this is accomplished.


The main factor which determines priority is whether or not the user (or their PI) has an [http://wiki.scinethpc.ca/wiki/index.php/Application_Process RAC allocation]. These are competitively allocated grants of computer time; there is a call for proposals towards the end of every calendar year.   Users with an allocation have high priorities in an attempt to make sure that they can use the amount of computer time the committees granted them.  Their priority decreases as they approach their allotted usage over the current window of time; by the time that they have exhausted that allotted usage, their priority is the same as users with no allocation (unallocated, or `default' users).    Unallocated users have a fixed, low, priority.
If you are unable to bundle your jobs into groups of 192, you should consider running on the [https://docs.alliancecan.ca/wiki/Narval Narval], [https://docs.alliancecan.ca/wiki/Rorqual Rorqual],[https://docs.alliancecan.ca/wiki/Graham Graham] or [https://docs.alliancecan.ca/wiki/Fir Fir], also part of {{the Alliance}}, instead of Trillium.


This priority system is called `fairshare'; the scheduler attempts to make sure everyone has their fair share of the machines, where the share that's fair has been determined by the allocation committee.    The fairshare window is a rolling window of one week; that is, any time you have a job in the queue, the fairshare calculation of its priority is given by how much of your allocation of the machine has been used in the last 7 days.
===How do I use the ramdisk?===


A particular allocation might have some fraction of GPC - say 4% of the machine (if the PI had been allocated 10 million CPU hours on GPC). The allocations have labels; (called `Resource Allocation Proposal Identifiers', or RAPIs) they look something like
On Trillium and Balam the ramdisk is a temporary file system in memory.  Write
to <code>$SLURM_TMPDIR</code>, which Slurm creates for the job and deletes when
the job ends, or directly to <code>/dev/shm</code>. Only the memory actually
used by the files is consumed, and it counts against the memory available to
your job, so do not fill it beyond that or the job will be killed.  Files
written directly to <code>/dev/shm</code> are not removed at job end; delete
them yourself.


  abc-123-ab
See [[Data_Management]] for the Trillium-specific size and caveats, and the
[https://docs.alliancecan.ca/wiki/Using_node-local_storage Alliance page on
using node-local storage] for how to stage data in and out.


where abc-123 is the PIs CCRI, and the suffix specifies which of the allocations granted to the PI is to be used.  These can be specified on a job-by-job basis.  On GPC, one adds the line
=== How can I run a job longer than 24 hours? ===
#PBS -A RAPI
to your script; on TCS, one uses
# @ account_no = RAPI
If the allocation to charge isn't specified, a default is used; each user has such a default, which can be changed at the same portal where one changes one's password,


https://portal.scinet.utoronto.ca/
The Trillium queue has a queue limit of 24 hours.  This is pretty typical for systems of its size; larger systems commonly have shorter run limits.  The limits are there to ensure that every user gets a fair share of the system (so that no one user ties up lots of nodes for a long time), and for safety (so that if one memory board in one node fails in the middle of a very long job, you haven't lost a months worth of work).
 
A jobs priority is determined primarily by the fairshare priority of the allocation it is being charged to; the previous 7 days worth of use under that allocation is calculated and compared to the allocated fraction (here, 5%) of the machine over that window (here, 7 days).  The fairshare priority is a decreasing function of the allocation left; if there is no allocation left (eg, jobs running under that allocation have already used 379,038 CPU hours in the past 7 days), the priority is the same as that of a user with no granted allocation.  (This last part has been the topic of some debate; as the machine gets more utilized, it will probably be the case that we allow RAC users who have greatly overused their quota to have their priorities to drop below that of unallocated users, to give the unallocated users some chance to run on our increasingly crowded system; this would have no undue effect on our allocated users as they still would be able to use the amount of resources they had been allocated by the committees.)   Note that all jobs charging the same allocation get the same fairshare priority.
 
There are other factors that go into calculating priority, but fairshare is the most significant.  Other factors include
* length of time waiting in queue (measured in units of the requested runtime). A waiting queue job gains priority as it sits in the queue to avoid job starvation.
* User adjustment of priorities ( See below ).
 
The major effect of these subdominant terms is to shuffle the order of jobs running under the same allocation.
 
===How do we manage job priorities within our research group?===
 
'''Answer:'''
 
Obviously, managing shared resources within a large group - whether it
is conference funding or CPU time - takes some doing. 
 
It's important to note that the fairshare periods are intentionally kept
quite short - just two weeks long. So, for example, let us say that in your resource
allocation you have about 10% of the machine.  Then for someone to use
up the whole two week amount of time in 2 days, they'd have to use 70%
of the machine in those two days - which is unlikely to happen by
accident.  If that does happen, 
those using the same allocation as the person who used 70% of the
machine over the two days will suffer by having much lower priority for
their jobs, but only for the next 12 days - and even then, if there are
idle cpus they'll still be able to compute.
 
There will be online tools for seeing how the allocation is being used,
and those people who are in charge in your group will be able to use
that information to manage the users, telling them to dial it down or
up.  We know that managing a large research group is hard, and we want
to make sure we provide you the information you need to do your job
effectively.
 
One way for users within a group to manage their priorities within the group
is with [[Moab#Adjusting_Job_Priority | user-adjusted priorities]]; this is
described in more detail on the [[Moab | Scheduling System]] page.


Since many of us have simulations that require more than that much time, most widely-used scientific applications have "checkpoint-restart" functionality, where every so often the complete state of the calculation is stored as a checkpoint file, and one can restart a simulation from one of these.  In fact, these restart files tend to be quite useful for a number of purposes.


If your job will take longer, you will have to submit your job in multiple parts, restarting from a checkpoint each time.  In this way, one can run a simulation much longer than the queue limit.  In fact, one can even write job scripts which automatically re-submit themselves until a run is completed, using [[#How_can_I_automatically_resubmit_a_job.3F | automatic resubmission. ]]


==Errors in running jobs==
<!--
<!--
==Errors in running jobs==
-->


=== I couldn't find the  .o output file in the .pbs_spool directory as I used to ===
=== I couldn't find the  .o output file in the .pbs_spool directory as I used to ===
Line 677: Line 484:


=== My GPC job died, telling me `Copy Stageout Files Failed' ===
=== My GPC job died, telling me `Copy Stageout Files Failed' ===
'''Answer:'''


When a job runs on GPC, the script's standard output and error are redirected to  
When a job runs on GPC, the script's standard output and error are redirected to  
Line 695: Line 500:


Mind you that it is good practice to redirect output to a file rather than depending on the job scheduler to do this for you.
Mind you that it is good practice to redirect output to a file rather than depending on the job scheduler to do this for you.
<!--


===Another transport will be used instead===
===Another transport will be used instead===
Line 721: Line 524:


--mca btl ^openib
--mca btl ^openib
-->


===IB Memory Errors, eg <tt> reg_mr Cannot allocate memory </tt>===
===IB Memory Errors, eg <tt> reg_mr Cannot allocate memory </tt>===
Line 746: Line 547:


to the same end.   
to the same end.   
For more information see [[GPC MPI Versions]].


===My compute job fails, saying <tt>libpng12.so.0: cannot open shared object file</tt> or <tt>libjpeg.so.62: cannot open shared object file</tt>===
===My compute job fails, saying <tt>libpng12.so.0: cannot open shared object file</tt> or <tt>libjpeg.so.62: cannot open shared object file</tt>===
'''Answer:'''


To maximize the amount of memory available for compute jobs, the compute nodes have a less complete system image than the development nodes.  In particular, since interactive graphics libraries like matplotlib and gnuplot are usually used interactively, the libraries for their use are included in the devel nodes' image but not the compute nodes.
To maximize the amount of memory available for compute jobs, the compute nodes have a less complete system image than the development nodes.  In particular, since interactive graphics libraries like matplotlib and gnuplot are usually used interactively, the libraries for their use are included in the devel nodes' image but not the compute nodes.


Many of these extra libraries are, however, available in the "extras" module.  So adding a "module load extras" to your job submission  script - or, for overkill, to your .bashrc - should enable these scripts to run on the compute nodes.
Many of these extra libraries are, however, available in the "extras" module.  So adding a "module load extras" to your job submission  script - or, for overkill, to your .bashrc - should enable these scripts to run on the compute nodes.
-->


==Monitoring jobs in the queue==
==Monitoring jobs in the queue==


<!--


===Why hasn't my job started?===
===Why hasn't my job started?===
'''Answer:'''


Use the moab command  
Use the moab command  
Line 773: Line 570:
and the last couple of lines should explain why a job hasn't started.   
and the last couple of lines should explain why a job hasn't started.   


Please see [[Moab| Job Scheduling System (Moab) ]] for more detailed information
Please see the [https://docs.alliancecan.ca/wiki/Running_jobs Alliance Running jobs page] for more detailed information.


===How do I figure out when my job will run?===
===How do I figure out when my job will run?===


'''Answer:'''
Please see the [https://docs.alliancecan.ca/wiki/Running_jobs Alliance Running jobs page].
 
Please see [[Moab#Available_Resources| Job Scheduling System (Moab) ]]
 
 
<!-- ===My GPC job is Held, and checkjob says "Batch:PolicyViolation" ===


'''Answer:'''
===My GPC job is Held, and checkjob says "Batch:PolicyViolation" ===


When this happens, you'll see your job stuck in a BatchHold state.   
When this happens, you'll see your job stuck in a BatchHold state.   
This happens because the job you've submitted breaks one of the rules of the queues, and is being held until you modify it or kill it and re-submit a conforming job.  The most common problems are:
This happens because the job you've submitted breaks one of the rules of the queues, and is being held until you modify it or kill it and re-submit a conforming job.  The most common problems are:
-->


===Running checkjob on my job gives me messages about JobFail and rejected===
===Running checkjob on my job gives me messages about JobFail and rejected===
Line 845: Line 635:


that is, the above output is the normal and expected (if somewhat cryptic) explanation as to why the job is waiting - nothing to worry about.
that is, the above output is the normal and expected (if somewhat cryptic) explanation as to why the job is waiting - nothing to worry about.


===How can I monitor my running jobs on TCS?===
===How can I monitor my running jobs on TCS?===
Line 859: Line 648:
If you run "llq1 -n" you will see a listing of jobs together with a lot of information, including the load.
If you run "llq1 -n" you will see a listing of jobs together with a lot of information, including the load.


-->


===How can I check the memory usage from my jobs?===
===How can I check the memory usage from my jobs?===
How can I check the memory usage from my jobs?
'''Answer:'''


In many occasions it can be really useful to take a look at how much memory your job is using while it is running.
In many occasions it can be really useful to take a look at how much memory your job is using while it is running.
There a couple of ways to do so:
There a couple of ways to do so:


1) using some of the [https://wiki.scinet.utoronto.ca/wiki/index.php/SciNet_Command_Line_Utilities command line utilities] we have developed, e.g: by using the '''jobperf''' or '''jobtop''' utilities, it will allow you to check the job performance and head's node utilization respectively.
1) using some of the [[SciNet_Command_Line_Utilities | command line utilities]] we have developed, e.g: by using the [https://docs.alliancecan.ca/wiki/Trillium_Quickstart#Monitoring_running_and_past_jobs jobperf] utility, will allow you to check the job performance and head's node utilization respectively.


2) ''ssh'' into the nodes where your job is being run and check for memory usage and system stats right there. For instance, trying the 'top' or 'free' commands, in those nodes.
2) SSH into the nodes where your job is being run and check for memory usage and system stats right there. For instance, trying the 'top' or 'free' commands, on those nodes.


Also, it always a good a idea and strongly encouraged to inspect the standard output-log and error-log generated for your job submissions.
3) run an [https://docs.alliancecan.ca/wiki/Trillium_Quickstart#Testing_and_debugging interactive job] on a compute node and try the 'top' or 'free' commands there.
These files are named respectively: ''JobName.{o|e}jobIdNumber''; where ''JobName'' is the name you gave to the job (via the '-N' PBS flag) and ''JobIdNumber'' is the id number of the job.
These files are saved in the working directory after the job is finished, but they can be also accessed on real-time using the '''jobError''' and '''jobOutput''' [https://wiki.scinet.utoronto.ca/wiki/index.php/SciNet_Command_Line_Utilities command line utilities] available loading the ''extras'' module.


Other related topics to memory usage: <br>
Also, it always a good a idea and strongly encouraged to inspect the output generated for your job submissions.
[https://wiki.scinet.utoronto.ca/wiki/index.php/GPC_Quickstart#Ram_Disk Using Ram Disk]
The output file is named ''JobName-jobIdNumber.out''; where ''JobName'' is the name you gave to the job (via the '--job-name' Slurm flag) and ''JobIdNumber'' is the id number of the job. If no job name is given, then the JobName will be "slurm".
<br>
This file is saved in the working directory after the job is finished.
[https://wiki.scinet.utoronto.ca/wiki/index.php/GPC_Quickstart#Memory_Configuration Different Memory Configuration nodes]
<br>
[https://wiki.scinet.utoronto.ca/wiki/index.php/FAQ#Monitoring_jobs_in_the_queue Monitoring Jobs in the Queue]
<br>
[https://wiki.scinet.utoronto.ca/wiki/images/a/a0/TechTalkJobMonitoring.pdf Tech Talk on Monitoring Jobs]


Other related topics to memory usage:
* [[FAQ#Monitoring_jobs_in_the_queue | Monitoring Jobs in the Queue]]
* [https://docs.alliancecan.ca/wiki/Using_node-local_storage Using node-local storage]


===Can I run cron jobs on devel nodes to monitor my jobs?===
===Can I run cron jobs on login nodes to monitor my jobs?===
 
Can I run cron jobs on devel nodes to monitor my jobs?
 
'''Answer:'''


No, we do not permit cron jobs to be run by users.  To monitor the status of your jobs using a cron job running on your own machine, use the command
No, we do not permit cron jobs to be run by users.  To monitor the status of your jobs using a cron job running on your own machine, use the command


<pre>
<pre>
ssh myusername@login.scinet.utoronto.ca "qstat -u myusername"
ssh myusername@trillium.scinet.utoronto.ca "squeue -u myusername"
</pre>
</pre>


or some variation of this command.  Of course, you will need to have SSH keys setup on the machine running the cron job, so that password entry won't be necessary.
or some variation of this command.  Of course, you will need to have [https://docs.alliancecan.ca/wiki/SSH_Keys SSH keys] set up on the machine running the cron job, so that password entry won't be necessary.
 


=== How does one check the amount of used CPU-hours in a project, and how does one get statistics for each user in the project? ===
=== How does one check the amount of used CPU-hours in a project, and how does one get statistics for each user in the project? ===


'''Answer:'''
This information is available on the [https://portal.scinet.utoronto.ca SciNet portal], See also [[SciNet Usage Reports]].


This information is available on the scinet portal,https://portal.scinet.utoronto.ca, See also [[SciNet Usage Reports]].
== Usage ==


<!--
=== How do I compute the core-years usage of my code? ===
==Errors in running jobs==


<!--
The "core-years" quantity is a way to account for the time your code runs, by considering the total number of cores and time used, accounting for the total number of hours in a year.
===On GPC, `Job cannot be executed'===
For instance if your code uses ''HH'' hours, in ''NN'' nodes, where each node has ''CC'' cores, then "core-years" can be computed as follow:


I get error messages like this trying to run on GPC:
''HH*(NN*CC)/(365*24)''


<pre>
If you have several independent instances (batches) running on different nodes, with ''BB'' number of batches and each batch during ''HH'' hours, then your core-years usage can be computed as,
PBS Job Id: 30414.gpc-sched
Job Name:  namd
Exec host:  gpc-f120n011/7+gpc-f120n011/6+gpc-f120n011/5+gpc-f120n011/4+gpc-f120n011/3+gpc-f120n011/2+gpc-f120n011/1+gpc-f120n011/0
Aborted by PBS Server
Job cannot be executed
See Administrator for help


''BB*HH*(NN*CC)/(365*24)''


As a general rule, on Trillium each node has 192 cores, so ''CC'' will always be 192.


PBS Job Id: 30414.gpc-sched
=== How much have I been running? ===
Job Name:  namd
Exec host:  gpc-f120n011/7+gpc-f120n011/6+gpc-f120n011/5+gpc-f120n011/4+gpc-f120n011/3+gpc-f120n011/2+gpc-f120n011/1+gpc-f120n011/0
An error has occurred processing your job, see below.
request to copy stageout files failed on node 'gpc-f120n011/7+gpc-f120n011/6+gpc-f120n011/5+gpc-f120n011/4+gpc-f120n011/3+gpc-f120n011/2+gpc-f120n011/1+gpc-f120n011/0' for job 30414.gpc-sched
 
Unable to copy file 30414.gpc-sched.OU to USER@gpc-f101n084.scinet.local:/scratch/G/GROUP/USER/projects/sim-performance-test/runtime/l/namd/8/namd.o30414
*** error from copy
30414.gpc-sched.OU: No such file or directory
*** end error output
</pre>
 
Try doing the following:
<pre>
mkdir ${SCRATCH}/.pbs_spool
ln -s ${SCRATCH}/.pbs_spool ~/.pbs_spool
</pre>
 
This is how all new accounts are setup on SciNet.
 
<tt>/home</tt> on GPC for compute jobs is mounted as a read-only file system. 
PBS by default tries to spool its output  files to <tt>${HOME}/.pbs_spool</tt>
which fails as it tries to write to a read-only file 
system.    New accounts at SciNet  get around this by having ${HOME}/.pbs_spool 
point to somewhere appropriate on <tt>/scratch</tt>, but if you've deleted that link
or directory, or had an old account, you will see errors like the above.
 
'''On Feb 24, the input/output mechanism has been reconfigured to use a local ramdisk as the temporary location, which means that .pbs_spool is no longer needed and this error should not occur anymore.'''
 
-->
 
=== I couldn't find the  .o output file in the .pbs_spool directory as I used to ===
 
On Feb 24 2011, the temporary location of standard input and output files was moved from the shared file system ${SCRATCH}/.pbs_spool to the
node-local directory /var/spool/torque/spool (which resides in ram). The final location after a job has finished is unchanged,
but to check the output/error of running jobs, users will now have to ssh into the (first) node assigned to the job and look in
/var/spool/torque/spool.
 
This alleviates access contention to the temporary directory, especially for those users that are running a lot of jobs, and  reduces the burden on the file system in general.
 
Note that it is good practice to redirect output to a file rather than to count on the scheduler to do this for you.
 
=== My GPC job died, telling me `Copy Stageout Files Failed' ===
 
'''Answer:'''
 
When a job runs on GPC, the script's standard output and error are redirected to
<tt>$PBS_JOBID.gpc-sched.OU</tt> and <tt>$PBS_JOBID.gpc-sched.ER</tt> in
/var/spool/torque/spool on the (first) node on which your job is running.  At the end of the job, those .OU and .ER files are copied to where the batch script tells them to be copied, by default <tt>$PBS_JOBNAME.o$PBS_JOBID</tt> and<tt>$PBS_JOBNAME.e$PBS_JOBID</tt>.  (You can set those filenames to be something clearer with the -e and -o options in your PBS script.)
 
When you get errors like this:
<pre>
An error has occurred processing your job, see below.
request to copy stageout files failed on node
</pre>
it means that the copying back process has failed in some way.  There could be a few reasons for this. The first thing to '''make sure that your .bashrc does not produce any output''', as the output-stageout is performed by bash and further output can cause this to fail.
But it also could have just been a random filesystem error, or it  could be that your job failed spectacularly enough to shortcircuit the normal job-termination process (e.g. ran out of memory very quickly) and those files just never got copied.
 
Write to [mailto:support@scinet.utoronto.ca <support@scinet.utoronto.ca>] if your input/output files got lost, as we will probably be able to retrieve them for you (please supply at least the jobid, and any other information that may be relevant).
 
Mind you that it is good practice to redirect output to a file rather than depending on the job scheduler to do this for you.
 
<!--
 
===Another transport will be used instead===
 
I get error messages like the following when running on the GPC at the start of the run, although the job seems to proceed OK.  Is this a problem?
<pre>
--------------------------------------------------------------------------
[[45588,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
 
Module: OpenFabrics (openib)
  Host: gpc-f101n005
 
Another transport will be used instead, although this may result in
lower performance.
--------------------------------------------------------------------------
</pre>
 
'''Answer:'''
 
Everything's fine.  The two MPI libraries scinet provides work for both the InifiniBand and the Gigabit Ethernet interconnects, and will always try to use the fastest interconnect available.  In this case, you ran on normal gigabit GPC nodes with no infiniband; but the MPI libraries have no way of knowing this, and try the infiniband first anyway.  This is just a harmless `failover' message; it tried to use the infiniband, which doesn't exist on this node, then fell back on using Gigabit ethernet (`another transport').
 
With OpenMPI, this can be avoided by not looking for infiniband; eg, by using the option
 
--mca btl ^openib
 
-->
 
===IB Memory Errors, eg <tt> reg_mr Cannot allocate memory </tt>===
 
Infiniband requires more memory than ethernet; it can use RDMA (remote direct memory access) transport for which it sets aside registered memory to transfer data.
 
In our current network configuration, it requires a _lot_ more memory, particularly as you go to larger process counts; unfortunately, that means you can't get around the "I need more memory" problem the usual way, by running on more nodes.  Machines with different memory or
network configurations may exhibit this problem at higher or lower MPI
task counts.
 
Right now, the best workaround is to reduce the number and size of OpenIB queues, using XRC: with the OpenMPI, add the following options to your mpirun command:
 
<pre>
-mca btl_openib_receive_queues X,128,256,192,128:X,2048,256,128,32:X,12288,256,128,32 -mca btl_openib_max_send_size 12288
</pre>
 
With Intel MPI, you should be able to do
 
<pre>
module load intelmpi/4.0.3.008
mpirun -genv I_MPI_FABRICS=shm:ofa  -genv I_MPI_OFA_USE_XRC=1 -genv I_MPI_OFA_DYNAMIC_QPS=1 -genv I_MPI_DEBUG=5 -np XX ./mycode
</pre>
 
to the same end. 
 
For more information see [[GPC MPI Versions]].
 
===My compute job fails, saying <tt>libpng12.so.0: cannot open shared object file</tt> or <tt>libjpeg.so.62: cannot open shared object file</tt>===
 
'''Answer:'''
 
To maximize the amount of memory available for compute jobs, the compute nodes have a less complete system image than the development nodes.  In particular, since interactive graphics libraries like matplotlib and gnuplot are usually used interactively, the libraries for their use are included in the devel nodes' image but not the compute nodes.
 
Many of these extra libraries are, however, available in the "extras" module.  So adding a "module load extras" to your job submission  script - or, for overkill, to your .bashrc - should enable these scripts to run on the compute nodes.


-->
You can get information about your SciNet resource usage by visiting the [[SciNet_Usage_Reports| SciNet Usage Reports]] page.  The [https://ccdb.alliancecan.ca CCDB] and [https://my.scinet.utoronto.ca my.SciNet] sites contain similar information.


==Data on SciNet disks==
==Data on SciNet disks==
Line 1,055: Line 706:
===How do I find out my disk usage?===
===How do I find out my disk usage?===


'''Answer:'''
The standard Unix/Linux utilities for finding the amount of disk space used by a directory are very slow, and notoriously inefficient on the GPFS filesystems that we run on the SciNet systems.  There are utilities that very quickly report your disk usage:
 
The standard unix/linux utilities for finding the amount of disk space used by a directory are very slow, and notoriously inefficient on the GPFS filesystems that we run on the SciNet systems.  There are utilities that very quickly report your disk usage:


The <tt>'''diskUsage'''</tt> command, available on the login nodes and datamovers, provides information in a number of ways on the home, scratch, and project file systems. For instance, how much disk space is being used by yourself and your group (with the -a option), or how much your usage has changed over a certain period ("delta information") or you may generate plots of your usage over time.
The <tt>'''diskUsage'''</tt> command, available on the login nodes and datamovers, provides information in a number of ways on the home, scratch, and project file systems. For instance, how much disk space is being used by yourself and your group (with the -a option), or how much your usage has changed over a certain period ("delta information") or you may generate plots of your usage over time.
This information is updated every 3-hours!
This information is updated every 3-hours!


More information about these filesystems is available at the [[Niagara_Quickstart#How_much_Disk_Space_Do_I_have_left.3F | Data_Management]].
More information about these filesystems is available at the [[Data_Management | Data Management page]].


===How do I transfer data to/from SciNet?===
===How do I transfer data to/from SciNet?===


'''Answer:'''
All incoming connections to SciNet go through relatively low-speed connections to the <tt>trillium.scinet</tt> gateways, so using scp to copy files the same way you ssh in is not an effective way to move lots of data.  Better tools are described in our page on [[Data_Management#Moving_data | Moving data]].


All incoming connections to SciNet go through relatively low-speed connections to the <tt>nagara.scinet</tt> gateways, so using scp to copy files the same way you ssh in is not an effective way to move lots of data. Better tools are described in our page on [[Niagara_Quickstart#Moving_data | Moving data]].
===My group works with data files of size 1-2 GB.  Is this too large to transfer by scp to trillium.scinet.utoronto.ca ?===


===My group works with data files of size 1-2 GB.  Is this too large to  transfer by scp to login.scinet.utoronto.ca ?===
Generally, occasion transfers of data less than 10GB is perfectly acceptable to so through the login nodes. See [[Data_Management#Moving_data | Moving data]].
 
'''Answer:'''
 
Generally, occasion transfers of data less than 10GB is perfectly acceptible to so through the login nodes. See [[Data_Management#Data_Transfer | Data Transfer]].


===How can I check if I have files in /scratch that are scheduled for automatic deletion?===
===How can I check if I have files in /scratch that are scheduled for automatic deletion?===


'''Answer:'''
Please see [[Data_Management#Scratch_Disk_Purging_Policy | Scratch Disk Purging Policy]]
 
Please see [[Storage_Quickstart#Scratch_Disk_Purging_Policy | Storage At SciNet]]


===How to allow my supervisor to manage files for me using ACL-based commands?===
===How to allow my supervisor to manage files for me using ACL-based commands?===


'''Answer:'''
Please see [[Data_Management#File.2FOwnership_Management_.28ACL.29 | File/Ownership Management]]


Please see [[Data_Management#File.2FOwnership_Management_.28ACL.29 | File/Ownership Management]]
<!--
===Can I transfer files between BGQ and HPSS?===


===Can we buy extra storage space on SciNet?===
Yes, however for now you'll need to do this in 2 steps:
* transfer from BGQ to Niagara SCRATCH
* then from Niagara SCRATCH to HPSS
-->


'''Answer:'''
== Miscellaneous ==
Yes, please see [[Data_Management#Buying_storage_space_on_GPFS_or_HPSS | Buying storage space on GPFS or HPSS ]] for more details.


===Can I transfer files between BGQ and HPSS?===
===How do I acknowledge SciNet?===


'''Answer:'''
Visit our [[Acknowledging_SciNet | Acknowledging SciNet ]] page for direction on how to thank us.
Yes, please see [https://support.scinet.utoronto.ca/wiki/index.php/BGQ#Bridge_to_HPSS Bridge to HPSS ] for more details.


==Keep 'em Coming!==
==Keep 'em Coming!==

Latest revision as of 19:46, 10 November 2026

==The Basics==x

Whom do I contact for support?

Whom do I contact if I have problems or questions about how to use the SciNet systems?

E-mail <support@scinet.utoronto.ca>

In your email, please include the following information:

  • your username on SciNet
  • the cluster that your question pertains to (Trillium, Trillium-GPU, Balam, ...; SciNet is not a cluster!),
  • any relevant error messages
  • the commands you typed before the errors occurred
  • the path to your code (if applicable)
  • the location of the job scripts (if applicable)
  • the directory from which it was submitted (if applicable)
  • a description of what it is supposed to do (if applicable)
  • if your problem is about connecting to SciNet, the type of computer you are connecting from.

Note that your password should never, never, never be to sent to us, even if your question is about your account.

Avoid sending email only to specific individuals at SciNet. Your chances of a quick reply increase significantly if you email our team! (support@scinet.utoronto.ca)

You can also ask the SciNet Chatbot. It can search the SciNet and Alliance documentation, check your own allocations, quotas, and jobs, and send a support ticket with the conversation attached. Do not paste passwords, SSH private keys, or other secrets into the chat.

I have a CCDB account, but I can't login to Trillium. How can I get access?

If you have an active CCDB/Alliance account but you do not have access to Trillium yet, go to the opt-in page on the CCDB site. After requesting access, it usually takes only one or two business days for access to be granted.

How can I reset the password for my Alliance (formerly Compute Canada) account?

You can reset your password for your Alliance (formerly Compute Canada) account here:

https://ccdb.alliancecan.ca/security/forgot

How can I change or reset the password for my SciNet account?

To reset your password at SciNet please go to Password reset page. Note that SciNet accounts are only necessary for non-Alliance resources, such as those of SOSCIP.

Connecting to Trillium

Do you have a recommended ssh program that will allow scinet access from Windows machines?

The Windows SSH programs we recommend are:

  • MobaXterm is a tabbed ssh client with some Cygwin tools, including ssh and X, all wrapped up into one executable.
  • Git Bash is an implementation of git which comes with a terminal emulator.
  • PuTTY - this is a terminal for windows that connects via ssh. It is a quick install and will get you up and running quickly.
    WARNING: Make sure you download putty from the official website, because there are "trojanized" versions of putty around that will send your login information to a site in Russia (as reported here).
    To set up your passphrase protected ssh key with putty, see here.
  • CygWin - this is a whole linux-like environment for windows, which also includes an X window server so that you can display remote windows on your desktop. Make sure you include the openssh and X window system in the installation for full functionality. This is recommended if you will be doing a lot of work on Linux machines, as it makes a very similar environment available on your computer.

To set up your ssh keys, follow the Linux instructions in the SSH keys page.

My ssh key does not work! WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!

If this doesn't work, contact support@scinet.utoronto.ca and investigate the problem. For example, if during a login session you get an message similar to the one below, just follow the instruction and delete the offending key on line 3 (you can use vi to jump to that line with ESC plus : plus 3). That only means that you may have logged in from your home computer to SciNet in the past, and that key is obsolete.

$ ssh USERNAME@trillium.scinet.utoronto.ca

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle
attack)!
It is also possible that the RSA host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
53:f9:60:71:a8:0b:5d:74:83:52:**fe:ea:1a:9e:cc:d3.
Please contact your system administrator.
Add correct host key in /home/<user>/.ssh/known_hosts to get rid of
this message.
Offending key in /home/<user>/.ssh/known_hosts:3
RSA host key for trillium.scinet.utoronto.ca 
<http://trillium.scinet.utoronto.ca <http://trillium.scinet.utoronto.ca>> has
changed and you have requested

Can't get graphics: "Can't open display/DISPLAY is not set"

To use graphics on SciNet machines and have it displayed on your machine, you need to have a X server running on your computer (an X server is the standard way graphics is done on linux). One an X server is running, you can log in with the "-Y" option to ssh ("-X" sometimes also works).

How to get an X server running on your computer, depends on the operating system. On linux machines with a graphical interface, X will already be running. On windows, the easiest solution is using MobaXterm, which comes with an X server (alternatives, such as cygwin with the x11 server installed, or running putty+Xming, can also work, but are a bit more work to set up. For Macs, you will need to install Xquartz.

Remote graphics stops working after a while: "Can't open display"

If you still cannot get graphics, or it works only for a while and then suddenly it "can't open display localhost:....", your X11 graphics connection may have timed out (Macs seem to be particularly prone to this). You'll have to tell your own computer not to allow, and not to timeout the X11 graphics connection.

The following should fix it. The ssh configuration settings are in a file called /etc/ssh/ssh_config (or /etc/ssh_config in older OS X versions, or $HOME/.ssh/config for specific users). In the config file, find (or create) the section "Host *" (meaning all hosts) and add the following lines:

 Host *
  ServerAliveInterval 60
  ServerAliveCountMax 3
  ForwardX11 yes
  ForwardX11Trusted yes
  ForwardX11Timeout 596h

(The Host * is only needed if there was no Host section yet to append these settings to.)

If this does not resolve it, try it again with "ssh -vvv -Y ....". The "-vvv" spews out a lot of diagnostic messages. Look for anything resembling a timeout, and let us know (support AT scinet DOT utoronto DOT ca).

Can't forward X: "Warning: No xauth data; using fake authentication data", or "X11 connection rejected because of wrong authentication."

I used to be able to forward X11 windows from SciNet to my home machine, but now I'm getting these messages; what's wrong?

Answer:

This very likely means that ssh/xauth can't update your ${HOME}/.Xauthority file.

The simplest possible reason for this is that you've filled your 100GB /home quota and so can't write anything to your home directory. Use

$ diskUsage

to check to see how close you are to your disk usage on ${HOME}.

Alternately, this could mean your .Xauthority file has become broken/corrupted/confused some how, in which case you can delete that file, and when you next log in you'll get a similar warning message involving creating .Xauthority, but things should work.

Why am I getting the error "Permission denied (publickey,gssapi-with-mic,password)"?

In most cases, the "Permission denied" error is caused by incorrect permission of the (hidden) .ssh directory. SSH is used for logging in as well as for the copying of the standard error and output files after a job.

For security reasons, the directory .ssh should only be writable and readable to you, but yours has read permission for everybody, and thus it fails. You can change this by

   chmod 700 ~/.ssh

And to be sure, also do

   chmod 600 ~/.ssh/id_rsa ~/authorized_keys

How to use VNC to connect to Trillium?

The use case is to start vncserver on a Trillium compute node and display it on your home computer. Compute nodes are not reachable from the internet, so you need SSH tunnelling through a login node. Compute nodes also mount $HOME read-only, so the VNC dot files must be moved to $SCRATCH and symlinked back.

See VNC for the Trillium-specific recipe, and the Alliance VNC page for client installation and general VNC usage.

Environment

I changed my .bashrc/.bash_profile and now nothing works

The default startup scripts provided by SciNet, and guidelines for them, can be found here. Certain things - like sourcing /etc/profile and /etc/bashrc are required for various SciNet routines to work!

If the situation is so bad that you cannot even log in, please send email support.

Could I have my login shell changed to (t)csh?

The login shell used on our systems is bash. While the tcsh is available, we do not support it as the default login shell at present. So "chsh" will not work, but you can always run tcsh interactively. Also, csh scripts will be executed correctly provided that they have the correct "shebang" #!/bin/tcsh at the top.

Can I work in a Jupyter Notebook?

Yes. Use Open OnDemand; SciNet's standalone JupyterHub was superseded by Open OnDemand on April 1, 2025.

Compiling your Code

How do I link against the Intel Math Kernel Library?

If you need to link to the Intel Math Kernal Library (MKL) with the intel compilers, just add the

-mkl

flag. There are in fact three flavours: -mkl=sequential, -mkl=parallel and -mkl=cluster, for the serial version, the threaded version and the mpi version, respectively. (Note: The cluster version is available only when using the intelmpi module and mpi compilation wrappers.)

If you need to link in the Intel Math Kernel Library (MKL) libraries to gcc/gfortran/c++, you are well advised to use the Intel(R) Math Kernel Library Link Line Advisor for help in devising the list of libraries to link with your code.

Note that this give the link line for the command line. When using this in Makefiles, replace $MKLPATH by ${MKLROOT}.

Note too that, unless the integer arguments you will be passing to the MKL libraries are actually 64-bit integers, rather than the normal int or INTEGER types, you want to specify 32-bit integers (lp64) .


Testing your Code

How can I run MATLAB / IDL / Gaussian / my favourite commercial software at SciNet?

Because SciNet serves such a disparate group of user communities, there is just no way we can buy licences for everyone's commercial package. The only commercial software we have purchased is that which in principle can benefit everyone -- fast compilers and math libraries.

If your research group requires a commercial package that you already have or are willing to buy licences for, contact us at support@scinet and we can work together to find out if it is feasible to implement the package's licensing arrangement on the SciNet clusters, and if so, what is the the best way to do it. Several commercial packages have already been installed, you can see the list here.

Note that it is important that you contact us before installing commercially licensed software on SciNet machines, even if you have a way to do it in your own directory without requiring sysadmin intervention. It puts us in a very awkward position if someone is found to be running unlicensed or invalidly licensed software on our systems, so we need to be aware of what is being installed where.

Also note that MATLAB is somewhat of a special case. See the MATLAB page for more information.

Can I run a something for a short time on the login nodes?

I am in the process of playing around with the MPI calls in my code to get it to work. I do a lot of tests and each of them takes a couple of seconds only. Can I do this on the login nodes?

Answer:

Yes, as long as it's very brief (a few minutes). People use the login nodes for their work, and you don't want to bog it down. Testing a real code can chew up a lot more resources than compiling, etc.

Once you have run some short test jobs, you should run an interactive job and run the tests either in the regular compute queue or using the debug queue that is reserved for this purpose.

How do I run a longer (but still shorter than an hour) test job quickly ?

There is a high turnover short queue called debug that is designed for this purpose. You can use it by adding

#SBATCH -p debug

to your submission script. This is for testing you code only; do not use the debug queue for production runs.

What does code scaling mean?

Please see A Performance Primer

What do you mean by throughput?

Please see A Performance Primer.

Here is a simple example:

Suppose you need to do 10 computations. Say each of these runs for 1 day on 1 node (192 cores), but they take "only" 18 hours on 2 nodes (384 cores). What is the fastest way to get all 10 computations done - as single-node jobs or as two-node jobs? Let us assume you have 2 nodes at your disposal. The answer, after some simple arithmetic, is that running your 10 jobs as single-node jobs will take 5 days, whereas if you ran them as two-node jobs it would take 7.5 days. Draw your own conclusions...

Submitting your jobs

How do I charge jobs to my RAC allocation?

Please see the accounting section of the Running jobs page.

How can I automatically resubmit a job?

Commonly you may have a job that you know will take longer to run than what is permissible in the queue. As long as your program contains checkpoint or restart capability, you can have one job automatically submit the next. In the following example it is assumed that the program finishes before the 24 hour limit and then resubmits itself by logging into one of the login nodes.

#!/bin/bash
#
#SBATCH --nodes=1
#SBATCH --time=24:00:00
#SBATCH --job-name my_job

# YOUR CODE HERE
./run_my_code

# RESUBMIT UNTIL RUN 10 TIMES
let ${NUM:=1}  # if undefined, defaults NUM to 1
if (( NUM++ < 10 )); then
      ssh -t tri-login01 "cd $SLURM_SUBMIT_DIR" \; "sbatch --export=NUM=$NUM script_name.sh"
fi
sbatch script_name.sh 

You can alternatively use Job dependencies through the queuing system which will not start one job until another job has completed.

If your job can't be made to automatically stop before the 24 hour queue window, but it does write out checkpoints, you can use the timeout command to stop the program while you still have time to resubmit; for instance

    timeout 1410m ./run_my_code argument1 argument2

will run the program for 23.5 hours (1410 minutes), and then send it SIGTERM to exit the program.

How can I pass in arguments to my submission script?

If you wish to make your scripts more generic you can use SLURM's ability to pass in environment variables to pass in arguments to your script. See this page.

Scheduling and Priority

Why did squeue --start say it would take 3 hours for my job to start before, and now it says my job will start in 10 hours?

Please look at the How do priorities work/why did that job jump ahead of mine in the queue? page.

How do priorities work/why did that job jump ahead of mine in the queue?

The queueing system used on SciNet machines is a Priority Queue. Jobs enter the queue at the back of the queue, and slowly make their way to the front as those ahead of them are run; but a job that enters the queue with a higher priority can `cut in line'.

The main factor which determines priority is whether or not the user belongs to a group(PI) who has a Alliance (formerly Compute Canada) RAC allocation. These are competitively allocated grants of computer time; there is a call for proposals in the fall of every calendar year. Users in groups with an allocation have higher priorities in an attempt to make sure that they can use the amount of computer time the committees granted them. Their priority decreases as they approach their allotted usage over the current window of time; by the time that they have exhausted that allotted usage, their priority is the same as users in groups with no allocation ("RAS", or `default' users). Default groups (hence users with these groups) share a fixed, low, priority.

This priority system is called `fairshare'; the scheduler attempts to make sure everyone has their fair share of the machines, where the share that's fair has been determined by the allocation committee. The fairshare window is a rolling window of one week; that is, any time you have a job in the queue, the fairshare calculation of its priority is given by how much of your allocation of the machine has been used in the last 7 days.

A particular allocation might have some fraction of Trillium - say 1% of the machine (if the PI had been allocated 2400 core-years on Trillium). The allocations have labels; (called `Resource Allocation Proposal Identifiers', or RAPIs) they look something like

 rrg-abc-ab

where rrg (or rpp) indicates an allocation, abc is the group name, and the suffix specifies which of the allocations granted to the PI is to be used. These can be specified on a job-by-job basis. On Trillium, one adds the line

#SBATCH -A RAPI

to your script. If the allocation to charge isn't specified, a default is used; each user has such a default, which can be changed at the SciNet portal where one changes one's password.

A job's priority is determined primarily by the fairshare priority of the allocation it is being charged to; the previous 7 days worth of use under that allocation is calculated and compared to the allocated fraction (here, 1%) of the machine over that window (here, 7 days). The fairshare priority is a decreasing function of the allocation left; if there is no allocation left (eg, jobs running under that allocation have already used 403,200 CPU hours (2400 cores x 7 days x 24 hours) in the past 7 days), the priority is the same as that of a user with no granted allocation. (This last part has been the topic of some debate; as the machine gets more utilized, it will probably be the case that we allow users in RAC groups who have greatly overused their quota to have their priorities to drop below that of unallocated groups, to give the unallocated group some chance to run on our increasingly crowded system; this would have no undue effect on our allocated groups as they still would be able to use the amount of resources they had been allocated by the committees.) Note that all jobs charging the same allocation get the same fairshare priority.

There are other factors that go into calculating priority, but fairshare is the most significant. Other factors include

  • length of time waiting in queue (measured in units of the requested runtime). A waiting queue job gains priority as it sits in the queue to avoid job starvation.
  • User adjustment of priorities ( See below ).

The major effect of these subdominant terms is to shuffle the order of jobs running under the same allocation.

How do we manage job priorities within our research group?

Obviously, managing shared resources within a large group - whether it is conference funding or CPU time - takes some doing.

It's important to note that the fairshare periods are intentionally kept quite short - just one week long. So, for example, let us say that in your resource allocation you have about 10% of the machine. Then for someone to use up the whole one week amount of time in one day, he'd have to use 70% of the machine in that one day - which is unlikely to happen by accident. If that does happen, those using the same allocation as the person who used 70% of the machine over the one day will suffer by having much lower priority for their jobs, but only for the next 6 days - and even then, if there are idle CPUs they'll still be able to compute.

There are online tools, both the CCDB and my.SciNet, for seeing how the allocation is being used, and those people who are in charge in your group will be able to use that information to manage users, telling them to dial it down or up. We know that managing a large research group is hard, and we want to make sure we provide you the information you need to do your job effectively.


When my job will be executed? "sinfo" shows that some nodes are idle but my job still does not get executed

The answer to your question is not easy, because the scheduler is a dynamic system. There are 2 main factors contributing to this lack of accuracy as to WHEN the job will start, among others:

1) suppose you issue a query, and it tells your job will start in 6 hours; However, if in the meantime a couple of users with higher priority than you submit some jobs, they will jump the line and start ahead of yours, therefore all of the sudden increasing your wait time to 10 or 20 hours. This is not a bad thing. This is exactly how fairshare is expected to work, and you should not get surprised or upset. Without an allocation there will always be somebody with higher priority than you that can come in at anytime and "ruin" your day. On the other hand, in all fairness, the longer your job remains on the queue the higher your priority becomes, up to a point in which it doesn't matter if the King of the Universe shows up, your job will start.

2) The other factor is that many people don't take the time to make a better estimate of how long it takes to execute their jobs. A good practice is to keep track of how long it took the last time for similar jobs, and add 20-30% on the request time for the next submission, just in case. However many people just send the jobs for maximum 24 hours (we have no control over this, despite our education efforts), and the scheduler has no way to know if the job will finish sooner, so it uses the 24 hours to estimate WHEN your job will start. But as you can imagine, many jobs will end sooner, so in all fairness, the scheduler will immediately move the line along, and this will favor every one, including you, and with this new information, if you query again it may tell you that your job will start in 2 hours or 30 minutes, instead of 6 hours.

As for your question about seeing idle nodes with "sinfo", and your job not starting: That is because those nodes are not there for you, pure and simple. They are idle because they are being held for those jobs with higher priority, some of them requiring 100 or 500 nodes for instance. Until that count is accumulated, they will sit idle, until the higher priority job starts. A clever user such as yourself, having asked us about this dynamic, may take advantage of the situation, by submitting jobs of 1 hour or 5 hours, and squeeze in those gaps. That is called backfill, and we have users that have become masters on this art, milking everything they can from the system.

Bottom line, the time to start will give you more of an order of magnitude as to when your job will be executed: in 50 hours or 5 hours? and you do the best with that information.

Regardless, the best is to always keep jobs on the queue, so they accrue priority over time, and don't ask for 24 hours if you know your job will only take 10 hours to finish.


My resource group has a default allocation of ~52 cores. What does this exactly mean? Does this imply that my group can use on average 52 cores per rolling week without losing priority?

~52 cores means your group's avg daily allowance for the whole year, sustained. Users within your group may slice and dice that in many different ways. For instance:

  • 1 job of 6.5 hours on 1 node ==> 1*6.5*192 = 1248 = 52*24
  • 2 jobs of 3.25 hours on 1 node ==> 2*3.25*192 = 1248 = 52*24

Your whole group combined can do this every day of the year, and your priority won't be reduced. In fact, if you submit many smaller jobs in any dimension (1 hour and/or 1 node) and you keep them on the queue most of the time you will likely milk more than ~52/day out of the system, by taking advantage of back-fill opportunities.

On the other hand, there will be times in which an user in the group may need to run a much larger job than the groups daily allowance. The scheduler will accommodate that for the first time around. For instance:

  • 1 job of 24 hours on 2 nodes ==> 1*24*2*192 = 9216 = ~7.4*(52*24)

that is over 7 times the daily allowance for the group. Consequently, once the job starts the priority for everyone else in the group will fall, quite a lot in fact, and the next job from anybody in the group, including the original submitter, may have to wait a whole week before it runs again. In another words, the scheduler acts in a very fair manner to ensure it tracks and maintains that ~52 cores daily average over time.

Running your jobs

My job can't write to /home

My code works fine when I test on the Trillium login nodes, but when I submit a job it fails. What's wrong?

Answer:

As discussed elsewhere, /home is mounted read-only on the compute nodes; you can only write to /home from the login nodes. In general, to run jobs you can read from /home but you'll have to write to /scratch (or, if you were allocated space through the RAC process, on /project). More information on SciNet filesystems can be found on our Data Management page.

Can I can use hybrid codes consisting of MPI and openMP ?

Yes.

How do I run serial jobs?

Trillium is a parallel computing resource, and SciNet's priority will always be parallel jobs. Having said that, if you can make efficient use of the resources using serial jobs and get good science done, that's good too, and we're happy to help you.

The Trillium CPU nodes each have 192 processing cores, and making efficient use of these nodes means using all 192 cores. As a result, serial work should be bundled so that each node is fully used.

It depends on the nature of your job what the best strategy is. Several approaches are presented in the serial job examples.

Why can't I request only a single cpu for my job on Trillium?

On Trillium, CPU jobs are allocated by whole node - that is, in chunks of 192 processors. If you want to run a job that requires only one processor, you need to bundle the jobs into groups of 192, so as to not be wasting the other 191 cores. See the serial job examples for more information on how this is accomplished.

If you are unable to bundle your jobs into groups of 192, you should consider running on the Narval, Rorqual,Graham or Fir, also part of Template:The Alliance, instead of Trillium.

How do I use the ramdisk?

On Trillium and Balam the ramdisk is a temporary file system in memory. Write to $SLURM_TMPDIR, which Slurm creates for the job and deletes when the job ends, or directly to /dev/shm. Only the memory actually used by the files is consumed, and it counts against the memory available to your job, so do not fill it beyond that or the job will be killed. Files written directly to /dev/shm are not removed at job end; delete them yourself.

See Data_Management for the Trillium-specific size and caveats, and the [https://docs.alliancecan.ca/wiki/Using_node-local_storage Alliance page on using node-local storage] for how to stage data in and out.

How can I run a job longer than 24 hours?

The Trillium queue has a queue limit of 24 hours. This is pretty typical for systems of its size; larger systems commonly have shorter run limits. The limits are there to ensure that every user gets a fair share of the system (so that no one user ties up lots of nodes for a long time), and for safety (so that if one memory board in one node fails in the middle of a very long job, you haven't lost a months worth of work).

Since many of us have simulations that require more than that much time, most widely-used scientific applications have "checkpoint-restart" functionality, where every so often the complete state of the calculation is stored as a checkpoint file, and one can restart a simulation from one of these. In fact, these restart files tend to be quite useful for a number of purposes.

If your job will take longer, you will have to submit your job in multiple parts, restarting from a checkpoint each time. In this way, one can run a simulation much longer than the queue limit. In fact, one can even write job scripts which automatically re-submit themselves until a run is completed, using automatic resubmission.

Errors in running jobs

Monitoring jobs in the queue

How can I check the memory usage from my jobs?

In many occasions it can be really useful to take a look at how much memory your job is using while it is running. There a couple of ways to do so:

1) using some of the command line utilities we have developed, e.g: by using the jobperf utility, will allow you to check the job performance and head's node utilization respectively.

2) SSH into the nodes where your job is being run and check for memory usage and system stats right there. For instance, trying the 'top' or 'free' commands, on those nodes.

3) run an interactive job on a compute node and try the 'top' or 'free' commands there.

Also, it always a good a idea and strongly encouraged to inspect the output generated for your job submissions. The output file is named JobName-jobIdNumber.out; where JobName is the name you gave to the job (via the '--job-name' Slurm flag) and JobIdNumber is the id number of the job. If no job name is given, then the JobName will be "slurm". This file is saved in the working directory after the job is finished.

Other related topics to memory usage:

Can I run cron jobs on login nodes to monitor my jobs?

No, we do not permit cron jobs to be run by users. To monitor the status of your jobs using a cron job running on your own machine, use the command

ssh myusername@trillium.scinet.utoronto.ca "squeue -u myusername"

or some variation of this command. Of course, you will need to have SSH keys set up on the machine running the cron job, so that password entry won't be necessary.

How does one check the amount of used CPU-hours in a project, and how does one get statistics for each user in the project?

This information is available on the SciNet portal, See also SciNet Usage Reports.

Usage

How do I compute the core-years usage of my code?

The "core-years" quantity is a way to account for the time your code runs, by considering the total number of cores and time used, accounting for the total number of hours in a year. For instance if your code uses HH hours, in NN nodes, where each node has CC cores, then "core-years" can be computed as follow:

HH*(NN*CC)/(365*24)

If you have several independent instances (batches) running on different nodes, with BB number of batches and each batch during HH hours, then your core-years usage can be computed as,

BB*HH*(NN*CC)/(365*24)

As a general rule, on Trillium each node has 192 cores, so CC will always be 192.

How much have I been running?

You can get information about your SciNet resource usage by visiting the SciNet Usage Reports page. The CCDB and my.SciNet sites contain similar information.

Data on SciNet disks

How do I find out my disk usage?

The standard Unix/Linux utilities for finding the amount of disk space used by a directory are very slow, and notoriously inefficient on the GPFS filesystems that we run on the SciNet systems. There are utilities that very quickly report your disk usage:

The diskUsage command, available on the login nodes and datamovers, provides information in a number of ways on the home, scratch, and project file systems. For instance, how much disk space is being used by yourself and your group (with the -a option), or how much your usage has changed over a certain period ("delta information") or you may generate plots of your usage over time. This information is updated every 3-hours!

More information about these filesystems is available at the Data Management page.

How do I transfer data to/from SciNet?

All incoming connections to SciNet go through relatively low-speed connections to the trillium.scinet gateways, so using scp to copy files the same way you ssh in is not an effective way to move lots of data. Better tools are described in our page on Moving data.

My group works with data files of size 1-2 GB. Is this too large to transfer by scp to trillium.scinet.utoronto.ca ?

Generally, occasion transfers of data less than 10GB is perfectly acceptable to so through the login nodes. See Moving data.

How can I check if I have files in /scratch that are scheduled for automatic deletion?

Please see Scratch Disk Purging Policy

How to allow my supervisor to manage files for me using ACL-based commands?

Please see File/Ownership Management


Miscellaneous

How do I acknowledge SciNet?

Visit our Acknowledging SciNet page for direction on how to thank us.

Keep 'em Coming!

Next question, please

Send your question to <support@scinet.utoronto.ca>; we'll answer it asap!