FAQ
The Basics
Whom do I contact for support?
Whom do I contact if I have problems or questions about how to use the SciNet systems?
Answer:
E-mail <support@scinet.utoronto.ca>
In your email, please include the following information:
- your username on SciNet
- the cluster that your question pertains to (NIA, BGQ, SGC, ...; SciNet is not a cluster!),
- any relevant error messages
- the commands you typed before the errors occurred
- the path to your code (if applicable)
- the location of the job scripts (if applicable)
- the directory from which it was submitted (if applicable)
- a description of what it is supposed to do (if applicable)
- if your problem is about connecting to SciNet, the type of computer you are connecting from.
Note that your password should never, never, never be to sent to us, even if your question is about your account.
Avoid sending email only to specific individuals at SciNet. Your chances of a quick reply increase significantly if you email our team! (support@scinet.utoronto.ca)
What does code scaling mean?
Answer:
Please see A Performance Primer
What do you mean by throughput?
Answer:
Please see A Performance Primer.
Here is a simple example:
Suppose you need to do 10 computations. Say each of these runs for 1 day on 8 cores, but they take "only" 18 hours on 16 cores. What is the fastest way to get all 10 computations done - as 8-core jobs or as 16-core jobs? Let us assume you have 2 nodes at your disposal. The answer, after some simple arithmetic, is that running your 10 jobs as 8-core jobs will take 5 days, whereas if you ran them as 16-core jobs it would take 7.5 days. Take your own conclusions...
I changed my .bashrc/.bash_profile and now nothing works
The default startup scripts provided by SciNet, and guidelines for them, can be found here. Certain things - like sourcing /etc/profile and /etc/bashrc are required for various SciNet routines to work!
If the situation is so bad that you cannot even log in, please send email support.
Could I have my login shell changed to (t)csh?
The login shell used on our systems is bash. While the tcsh is available, we do not support it as the default login shell at present. So "chsh" will not work, but you can always run tcsh interactively. Also, csh scripts will be executed correctly provided that they have the correct "shebang" #!/bin/tcsh at the top.
How can I run MATLAB / IDL / Gaussian / my favourite commercial software at SciNet?
Answer:
Because SciNet serves such a disparate group of user communities, there is just no way we can buy licenses for everyone's commercial package. The only commercial software we have purchased is that which in principle can benefit everyone -- fast compilers and math libraries.
If your research group requires a commercial package that you already have or are willing to buy licenses for, contact us at support@scinet and we can work together to find out if it is feasible to implement the packages licensing arrangement on the SciNet clusters, and if so, what is the the best way to do it.
Note that it is important that you contact us before installing commercially licensed software on SciNet machines, even if you have a way to do it in your own directory without requiring sysadmin intervention. It puts us in a very awkward position if someone is found to be running unlicensed or invalidly licensed software on our systems, so we need to be aware of what is being installed where.
Do you have a recommended ssh program that will allow scinet access from Windows machines?
Answer:
The SSH for Windows users programs we recommend are:
- MobaXterm is a tabbed ssh client with some Cygwin tools, including ssh and X, all wrapped up into one executable.
- Git Bash is an implementation of git which comes with a terminal emulator.
- PuTTY - this is a terminal for windows that connects via ssh. It is a quick install and will get you up and running quickly.
WARNING: Make sure you download putty from the official website, because there are "trojanized" versions of putty around that will send your login information to a site in Russia (as reported here).
To set up your passphrase protected ssh key with putty, see here. - CygWin - this is a whole linux-like environment for windows, which also includes an X window server so that you can display remote windows on your desktop. Make sure you include the openssh and X window system in the installation for full functionality. This is recommended if you will be doing a lot of work on Linux machines, as it makes a very similar environment available on your computer.
To set up your ssh keys, following the Linux instruction on the SSH keys page.
My ssh key does not work! WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!
Answer:
- If this doesn't work, you should be able to login using your password, and investigate the problem. For example, if during a login session you get an message similar to the one below, just follow the instruction and delete the offending key on line 3 (you can use vi to jump to that line with ESC plus : plus 3). That only means that you may have logged in from your home computer to SciNet in the past, and that key is obsolete.
$ ssh USERNAME@niagara.scinet.utoronto.ca @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@**@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is 53:f9:60:71:a8:0b:5d:74:83:52:**fe:ea:1a:9e:cc:d3. Please contact your system administrator. Add correct host key in /home/<user>/.ssh/known_hosts to get rid of this message. Offending key in /home/<user>/.ssh/known_hosts:3 RSA host key for niagara.scinet.utoronto.ca <http://niagara.scinet.utoronto.ca <http://niagara.scinet.utoronto.ca>> has changed and you have requested
- If you get the message below you may need to logout of your gnome session and log back in since the ssh-agent needs to be
restarted with the new passphrase ssh key.
$ ssh USERNAME@niagara.scinet.utoronto.ca Agent admitted failure to sign using the key.
Can't get graphics: "Can't open display/DISPLAY is not set"
To use graphics on SciNet machines and have it displayed on your machine, you need to have a X server running on your computer (an X server is the standard way graphics is done on linux). One an X server is running, you can log in with the "-Y" option to ssh ("-X" sometimes also works).
How to get an X server running on your computer, depends on the operating system. On linux machines with a graphical interface, X will already be running. On windows, the easiest solution is using MobaXterm, which comes with an X server (alternatives, such as cygwin with the x11 server installed, or running putty+Xming, can also work, but are a bit more work to set up. For Macs, you will need to install Xquartz.
Remote graphics stops working after a while: "Can't open display"
If you still cannot get graphics, or it works only for a while and then suddenly it "can't open display localhost:....", your X11 graphics connection may have timed out (Macs seem to be particularly prone to this). You'll have to tell your own computer not to allow, and not to timeout the X11 graphics connection.
The following should fix it. The ssh configuration settings are in a file called /etc/ssh/ssh_config (or /etc/ssh_config in older OS X versions, or $HOME/.ssh/config for specific users). In the config file, find (or create) the section "Host *" (meaning all hosts) and add the following lines:
Host * ServerAliveInterval 60 ServerAliveCountMax 3 ForwardX11 yes ForwardX11Trusted yes ForwardX11Timeout 596h
(The Host * is only needed if there was no Host section yet to append these settings to.)
If this does not resolve it, try it again with "ssh -vvv -Y ....". The "-vvv" spews out a lot of diagnostic messages. Look for anything resembling a timeout, and let us know (support AT scinet DOT utoronto DOT ca).
Can't forward X: "Warning: No xauth data; using fake authentication data", or "X11 connection rejected because of wrong authentication."
I used to be able to forward X11 windows from SciNet to my home machine, but now I'm getting these messages; what's wrong?
Answer:
This very likely means that ssh/xauth can't update your ${HOME}/.Xauthority file.
The simplest pssible reason for this is that you've filled your 10GB /home quota and so can't write anything to your home directory. Use
$ diskUsage
to check to see how close you are to your disk usage on ${HOME}.
Alternately, this could mean your .Xauthority file has become broken/corrupted/confused some how, in which case you can delete that file, and when you next log in you'll get a similar warning message involving creating .Xauthority, but things should work.
I have a CCDB account, but I can't login to SciNet. How can I get a SciNet account?
Answer:
You must extend your CCDB application process to also get a SciNet account:
https://www.scinethpc.ca/getting-a-scinet-account/
How can I reset the password for my Compute Canada account?
Answer:
You can reset your password for your Compute Canada account here:
https://ccdb.computecanada.ca/security/forgot
How can I change or reset the password for my SciNet account?
Answer:
To reset your password at SciNet please go to Password reset page.
Why am I getting the error "Permission denied (publickey,gssapi-with-mic,password)"?
In most cases, the "Permission denied" error is caused by incorrect permission of the (hidden) .ssh directory. SSH is used for logging in as well as for the copying of the standard error and output files after a job.
For security reasons, the directory .ssh should only be writable and readable to you, but yours has read permission for everybody, and thus it fails. You can change this by
chmod 700 ~/.ssh
And to be sure, also do
chmod 600 ~/.ssh/id_rsa ~/authorized_keys
How do I compute the core-years usage of my code?
The "core-years" quantity is a way to account for the time your code runs, by considering the total number of cores and time used, accounting for the total number of hours in a year. For instance if your code uses HH hours, in NN nodes, where each node has CC cores, then "core-years" can be computed as follow:
HH*(NN*CC)/(365*24)
If you have several independent instances (batches) running on different nodes, with BB number of batches and each batch during HH hours, then your core-years usage can be computed as,
BB*HH*(NN*CC)/(365*24)
As a general rule, the Niagara system, each node has only 40 cores, so CC will be always 40.
How much have I been running?
You can get information about your SciNet resource usage by visiting the SciNet Usage Reports page.
Compiling your Code
How do I link against the Intel Math Kernel Library?
If you need to link to the Intel Math Kernal Library (MKL) with the intel compilers, just add the
-mkl
flag. There are in fact three flavours: -mkl=sequential, -mkl=parallel and -mkl=cluster, for the serial version, the threaded version and the mpi version, respectively. (Note: The cluster version is available only when using the intelmpi module and mpi compilation wrappers.)
If you need to link in the Intel Math Kernel Library (MKL) libraries to gcc/gfortran/c++, you are well advised to use the Intel(R) Math Kernel Library Link Line Advisor for help in devising the list of libraries to link with your code.
Note that this give the link line for the command line. When using this in Makefiles, replace $MKLPATH by ${MKLROOT}.
Note too that, unless the integer arguments you will be passing to the MKL libraries are actually 64-bit integers, rather than the normal int or INTEGER types, you want to specify 32-bit integers (lp64) .
Testing your Code
Can I run a something for a short time on the login nodes?
I am in the process of playing around with the mpi calls in my code to get it to work. I do a lot of tests and each of them takes a couple of seconds only. Can I do this on the login nodes?
Answer:
Yes, as long as it's very brief (a few minutes). People use the login nodes for their work, and you don't want to bog it down. Testing a real code can chew up a lot more resources than compiling, etc.
Once you have run some short test jobs, you should run an interactive job and run the tests either in the regular batch queue or using the debug queue that is reserved for this purpose.
How do I run a longer (but still shorter than an hour) test job quickly ?
Answer
On NIagara there is a high turnover short queue called debug that is designed for this purpose. You can use it by adding
#SBATCH -p debug
to your submission script. This is for testing you code only; do not use the debug queue for production runs.
Submitting your jobs
How do I charge jobs to my RAC allocation?
Answer:
Please see the accounting section of Moab page.
How can I automatically resubmit a job?
Commonly you may have a job that you know will take longer to run than what is permissible in the queue. As long as your program contains checkpoint or restart capability, you can have one job automatically submit the next. In the following example it is assumed that the program finishes before the 24 hour limit and then resubmits itself by logging into one of the login nodes.
#!/bin/bash
#
#PBS -l nodes=1:ppn=8,walltime=48:00:00
#PBS -N my_job
# DIRECTORY TO RUN - $PBS_O_WORKDIR is directory job was submitted from
cd $PBS_O_WORKDIR
# YOUR CODE HERE
./run_my_code
# RESUBMIT 10 TIMES HERE
num=$NUM
if [ "$num" -lt 10 ]; then
num=$(($num+1))
ssh gpc01 "cd $PBS_O_WORKDIR; qsub ./script_name.sh -v NUM=$num";
fi
qsub script_name.sh -v NUM=0
You can alternatively use Job dependencies through the queuing system which will not start one job until another job has completed.
If your job can't be made to automatically stop before the 48 hour queue window, but it does write out checkpoints, you can use the timeout command to stop the program while you still have time to resubmit; for instance
timeout 2850m ./run_my_code argument1 argument2
will run the program for 47.5 hours (2850 minutes), and then send it SIGTERM to exit the program.
How can I pass in arguments to my submission script?
If you wish to make your scripts more generic you can use qsub's ability to pass in environment variables to pass in arguments to your script. The following example shows a case where an input and an output file are passed in on the qsub line. Multiple variables can be passed in using the qsub "-v" option and comma delimited.
#!/bin/bash # MOAB/Torque example of passing in arguments # SciNet GPC # #PBS -l nodes=1:ppn=8,walltime=48:00:00 #PBS -N my_job # DIRECTORY TO RUN - $PBS_O_WORKDIR is directory job was submitted from cd $PBS_O_WORKDIR # YOUR CODE HERE ./run_my_code -f $INFILE -o $OUTFILE
qsub script_name.sh -v INFILE=input.txt,OUTFILE=outfile.txt
I submit my GPC job, and I get an email saying it was rejected
Answer:
This happens because the job you've submitted breaks one of the rules of the queues and is rejected. An email is sent with the JOBID, JOBNAME, and the reason it was rejected. The following is an example where a job requests more than 48 hours and was rejected.
PBS Job Id: 3462493.gpc-sched Job Name: STDIN job deleted Job deleted at request of root@gpc-sched MOAB_INFO: job was rejected - job violates class configuration 'wclimit too high for class 'batch_ib' (345600 > 172800)'
Jobs on the TCS or GPC may only run for 48 hours at a time; this restriction greatly increases responsiveness of the queue and queue throughput for all our users. If your computation requires longer than that, as many do, you will have to checkpoint your job and restart it after each 48-hour queue window. You can manually re-submit jobs, or if you can have your job cleanly exit before the 48 hour window, there are ways to automatically resubmit jobs .
Other rejections return a more cryptic error saying "job violates class configuration" such as follows:
PBS Job Id: 3462409.gpc-sched Job Name: STDIN job deleted Job deleted at request of root@gpc-sched MOAB_INFO: job was rejected - job violates class configuration 'user required by class 'batch''
The most common problems that result in this error are:
- Incorrect number of processors per node: Jobs on the GPC are scheduled per-node not per-core and since each node has 8 processor cores (ppn=8) the smallest job allowed is one node with 8 cores (nodes=1:ppn=8). For serial jobs users must bundle or batch them together in groups of 8. See How do I run serial jobs on GPC?
- No number of nodes specified: Jobs submitted to the main queue must request a specific number of nodes, either in the submission script (with a line like #PBS -l nodes=2:ppn=8) or on the command line (eg, qsub -l nodes=2:ppn=8,walltime=5:00:00 script.pbs). Note that for the debug queue, you can get away without specifying a number of nodes and a default of one will be assigned; for both technical and policy reasons, we do not enforce such a default for the main ("batch") queue.
- There is a 15 minute walltime minimum on all queues except debug and if you set your walltime less than this, it will be rejected.
When submitting your job, fails saying: "script is written in DOS/Windows text format"
Answer:
Very likely you have written your script in a windows machine, so to fix this you just need to change the format of you submission script to unix from Windows/DOS. Use the command below for all your script files:
dos2unix <pbs-script-file>
where <pbs-script-file> has to be substituted by the name of your script file. -->
Running your jobs
My job can't write to /home
My code works fine when I test on the Niagara login nodes, but when I submit a job it fails. What's wrong?
Answer:
As [[Niagara_Quickstart#Data_Management | discussed elsewhere], /home is mounted read-only on the compute nodes; you can only write to /home from the login nodes. In general, to run jobs you can read from /home but you'll have to write to /scratch (or, if you were allocated space through the RAC process, on /project). More information on SciNet filesystems can be found on our Data Management page.
Can I can use hybrid codes consisting of MPI and openMP ?
Answer:
Yes.
How do I run serial jobs?
Answer:
Niagara is a parallel computing resource, and SciNet's priority will always be parallel jobs. Having said that, if you can make efficient use of the resources using serial jobs and get good science done, that's good too, and we're happy to help you.
The Niagara nodes each have 40 processing cores, and making efficient use of these nodes means using all forty cores. As a result, users must run multiples of 40 jobs at a time.
It depends on the nature of your job what the best strategy is. Several approaches are presented on the serial page.
Why can't I request only a single cpu for my job on Niagara?
Answer:
On Niagara jobs are allocated by whole node - that is, in chunks of 40 processors. If you want to run a job that requires only one processor, you need to bundle the jobs into groups of 40, so as to not be wasting the other 39 cores. See the serial run page for more information on how this is accomplished.
How do I use the ramdisk on Niagara?
To use the ramdisk, create and read to / write from files in /dev/shm/.. just as one would to (eg) ${SCRATCH}. Only the amount of RAM needed to store the files will be taken up by the temporary file system; thus if you have 40 serial jobs each requiring 1 GB of RAM, and 1GB is taken up by various OS services, you would still have approximately 160GB available to use as ramdisk on a ~202GB node. However, if you were to write 8 GB of data to the RAM disk, this would exceed available memory and your job would likely crash.
It is very important to delete your files from ramdisk at the end of your job. If you do not do this, the next user to use that node will have less RAM available than they might expect, and this might kill their jobs.
More details on how to setup your script to use the ramdisk can be found on the Ramdisk page.
How can I run a job longer than 24 hours?
Answer:
The Niagara queue has a queue limit of 24 hours for groups with a RAC allocation, and 12 hours for those groups which do not. This is pretty typical for systems of its size; larger systems commonly have shorter run limits. The limits are there to ensure that every user gets a fair share of the system (so that no one user ties up lots of nodes for a long time), and for safety (so that if one memory board in one node fails in the middle of a very long job, you haven't lost a months worth of work).
Since many of us have simulations that require more than that much time, most widely-used scientific applications have "checkpoint-restart" functionality, where every so often the complete state of the calculation is stored as a checkpoint file, and one can restart a simulation from one of these. In fact, these restart files tend to be quite useful for a number of purposes.
If your job will take longer, you will have to submit your job in multiple parts, restarting from a checkpoint each time. In this way, one can run a simulation much longer than the queue limit. In fact, one can even write job scripts which automatically re-submit themselves until a run is completed, using automatic resubmission.
Why did showstart say it would take 3 hours for my job to start before, and now it says my job will start in 10 hours?
Answer:
Please look at the How do priorities work/why did that job jump ahead of mine in the queue? page.
How do priorities work/why did that job jump ahead of mine in the queue?
Answer:
The queueing system used on SciNet machines is a Priority Queue. Jobs enter the queue at the back of the queue, and slowly make their way to the front as those ahead of them are run; but a job that enters the queue with a higher priority can `cut in line'.
The main factor which determines priority is whether or not the user (or their PI) has an RAC allocation. These are competitively allocated grants of computer time; there is a call for proposals towards the end of every calendar year. Users with an allocation have high priorities in an attempt to make sure that they can use the amount of computer time the committees granted them. Their priority decreases as they approach their allotted usage over the current window of time; by the time that they have exhausted that allotted usage, their priority is the same as users with no allocation (unallocated, or `default' users). Unallocated users have a fixed, low, priority.
This priority system is called `fairshare'; the scheduler attempts to make sure everyone has their fair share of the machines, where the share that's fair has been determined by the allocation committee. The fairshare window is a rolling window of one week; that is, any time you have a job in the queue, the fairshare calculation of its priority is given by how much of your allocation of the machine has been used in the last 7 days.
A particular allocation might have some fraction of GPC - say 4% of the machine (if the PI had been allocated 10 million CPU hours on GPC). The allocations have labels; (called `Resource Allocation Proposal Identifiers', or RAPIs) they look something like
abc-123-ab
where abc-123 is the PIs CCRI, and the suffix specifies which of the allocations granted to the PI is to be used. These can be specified on a job-by-job basis. On GPC, one adds the line
#PBS -A RAPI
to your script; on TCS, one uses
# @ account_no = RAPI
If the allocation to charge isn't specified, a default is used; each user has such a default, which can be changed at the same portal where one changes one's password,
https://portal.scinet.utoronto.ca/
A jobs priority is determined primarily by the fairshare priority of the allocation it is being charged to; the previous 7 days worth of use under that allocation is calculated and compared to the allocated fraction (here, 5%) of the machine over that window (here, 7 days). The fairshare priority is a decreasing function of the allocation left; if there is no allocation left (eg, jobs running under that allocation have already used 379,038 CPU hours in the past 7 days), the priority is the same as that of a user with no granted allocation. (This last part has been the topic of some debate; as the machine gets more utilized, it will probably be the case that we allow RAC users who have greatly overused their quota to have their priorities to drop below that of unallocated users, to give the unallocated users some chance to run on our increasingly crowded system; this would have no undue effect on our allocated users as they still would be able to use the amount of resources they had been allocated by the committees.) Note that all jobs charging the same allocation get the same fairshare priority.
There are other factors that go into calculating priority, but fairshare is the most significant. Other factors include
- length of time waiting in queue (measured in units of the requested runtime). A waiting queue job gains priority as it sits in the queue to avoid job starvation.
- User adjustment of priorities ( See below ).
The major effect of these subdominant terms is to shuffle the order of jobs running under the same allocation.
How do we manage job priorities within our research group?
Answer:
Obviously, managing shared resources within a large group - whether it is conference funding or CPU time - takes some doing.
It's important to note that the fairshare periods are intentionally kept quite short - just two weeks long. So, for example, let us say that in your resource allocation you have about 10% of the machine. Then for someone to use up the whole two week amount of time in 2 days, they'd have to use 70% of the machine in those two days - which is unlikely to happen by accident. If that does happen, those using the same allocation as the person who used 70% of the machine over the two days will suffer by having much lower priority for their jobs, but only for the next 12 days - and even then, if there are idle cpus they'll still be able to compute.
There will be online tools for seeing how the allocation is being used, and those people who are in charge in your group will be able to use that information to manage the users, telling them to dial it down or up. We know that managing a large research group is hard, and we want to make sure we provide you the information you need to do your job effectively.
One way for users within a group to manage their priorities within the group is with user-adjusted priorities; this is described in more detail on the Scheduling System page.
Errors in running jobs
I couldn't find the .o output file in the .pbs_spool directory as I used to
On Feb 24 2011, the temporary location of standard input and output files was moved from the shared file system ${SCRATCH}/.pbs_spool to the node-local directory /var/spool/torque/spool (which resides in ram). The final location after a job has finished is unchanged, but to check the output/error of running jobs, users will now have to ssh into the (first) node assigned to the job and look in /var/spool/torque/spool.
This alleviates access contention to the temporary directory, especially for those users that are running a lot of jobs, and reduces the burden on the file system in general.
Note that it is good practice to redirect output to a file rather than to count on the scheduler to do this for you.
My GPC job died, telling me `Copy Stageout Files Failed'
Answer:
When a job runs on GPC, the script's standard output and error are redirected to $PBS_JOBID.gpc-sched.OU and $PBS_JOBID.gpc-sched.ER in /var/spool/torque/spool on the (first) node on which your job is running. At the end of the job, those .OU and .ER files are copied to where the batch script tells them to be copied, by default $PBS_JOBNAME.o$PBS_JOBID and$PBS_JOBNAME.e$PBS_JOBID. (You can set those filenames to be something clearer with the -e and -o options in your PBS script.)
When you get errors like this:
An error has occurred processing your job, see below. request to copy stageout files failed on node
it means that the copying back process has failed in some way. There could be a few reasons for this. The first thing to make sure that your .bashrc does not produce any output, as the output-stageout is performed by bash and further output can cause this to fail. But it also could have just been a random filesystem error, or it could be that your job failed spectacularly enough to shortcircuit the normal job-termination process (e.g. ran out of memory very quickly) and those files just never got copied.
Write to <support@scinet.utoronto.ca> if your input/output files got lost, as we will probably be able to retrieve them for you (please supply at least the jobid, and any other information that may be relevant).
Mind you that it is good practice to redirect output to a file rather than depending on the job scheduler to do this for you.
Another transport will be used instead
I get error messages like the following when running on the GPC at the start of the run, although the job seems to proceed OK. Is this a problem?
-------------------------------------------------------------------------- [[45588,1],0]: A high-performance Open MPI point-to-point messaging module was unable to find any relevant network interfaces: Module: OpenFabrics (openib) Host: gpc-f101n005 Another transport will be used instead, although this may result in lower performance. --------------------------------------------------------------------------
Answer:
Everything's fine. The two MPI libraries scinet provides work for both the InifiniBand and the Gigabit Ethernet interconnects, and will always try to use the fastest interconnect available. In this case, you ran on normal gigabit GPC nodes with no infiniband; but the MPI libraries have no way of knowing this, and try the infiniband first anyway. This is just a harmless `failover' message; it tried to use the infiniband, which doesn't exist on this node, then fell back on using Gigabit ethernet (`another transport').
With OpenMPI, this can be avoided by not looking for infiniband; eg, by using the option
--mca btl ^openib
IB Memory Errors, eg reg_mr Cannot allocate memory
Infiniband requires more memory than ethernet; it can use RDMA (remote direct memory access) transport for which it sets aside registered memory to transfer data.
In our current network configuration, it requires a _lot_ more memory, particularly as you go to larger process counts; unfortunately, that means you can't get around the "I need more memory" problem the usual way, by running on more nodes. Machines with different memory or network configurations may exhibit this problem at higher or lower MPI task counts.
Right now, the best workaround is to reduce the number and size of OpenIB queues, using XRC: with the OpenMPI, add the following options to your mpirun command:
-mca btl_openib_receive_queues X,128,256,192,128:X,2048,256,128,32:X,12288,256,128,32 -mca btl_openib_max_send_size 12288
With Intel MPI, you should be able to do
module load intelmpi/4.0.3.008 mpirun -genv I_MPI_FABRICS=shm:ofa -genv I_MPI_OFA_USE_XRC=1 -genv I_MPI_OFA_DYNAMIC_QPS=1 -genv I_MPI_DEBUG=5 -np XX ./mycode
to the same end.
For more information see GPC MPI Versions.
Answer:
To maximize the amount of memory available for compute jobs, the compute nodes have a less complete system image than the development nodes. In particular, since interactive graphics libraries like matplotlib and gnuplot are usually used interactively, the libraries for their use are included in the devel nodes' image but not the compute nodes.
Many of these extra libraries are, however, available in the "extras" module. So adding a "module load extras" to your job submission script - or, for overkill, to your .bashrc - should enable these scripts to run on the compute nodes.
-->
Monitoring jobs in the queue
Data on SciNet disks
How do I find out my disk usage?
Answer:
The standard unix/linux utilities for finding the amount of disk space used by a directory are very slow, and notoriously inefficient on the GPFS filesystems that we run on the SciNet systems. There are utilities that very quickly report your disk usage:
The diskUsage command, available on the login nodes and datamovers, provides information in a number of ways on the home, scratch, and project file systems. For instance, how much disk space is being used by yourself and your group (with the -a option), or how much your usage has changed over a certain period ("delta information") or you may generate plots of your usage over time. This information is updated every 3-hours!
More information about these filesystems is available at the Data_Management.
How do I transfer data to/from SciNet?
Answer:
All incoming connections to SciNet go through relatively low-speed connections to the nagara.scinet gateways, so using scp to copy files the same way you ssh in is not an effective way to move lots of data. Better tools are described in our page on Moving data.
My group works with data files of size 1-2 GB. Is this too large to transfer by scp to niagara.scinet.utoronto.ca ?
Answer:
Generally, occasion transfers of data less than 10GB is perfectly acceptable to so through the login nodes. See Moving data.
How can I check if I have files in /scratch that are scheduled for automatic deletion?
Answer:
Please see Scratch Disk Purging Policy
How to allow my supervisor to manage files for me using ACL-based commands?
Answer:
Please see File/Ownership Management
Can I transfer files between BGQ and HPSS?
Answer: Yes, however for now you'll need to do this in 2 step:
- transfer from BGQ to Niagara SCRATCH
- then from Niagara SCRATCH to HPSS
Keep 'em Coming!
Next question, please
Send your question to <support@scinet.utoronto.ca>; we'll answer it asap!