Difference between revisions of "Niagara Quickstart"
(→Testing with Graphics: X-forwarding)
(→Testing with Graphics: X-forwarding)
|Line 564:||Line 564:|
<li> If <code>debugjob</code> is not suitable for your case due to the limitations either on time or resources (see above [
<li> If <code>debugjob</code> is not suitable for your case due to the limitations either on time or resources (see above [Testing]), then you have to follow these steps:
You will need two terminals in order to achieve this:
You will need two terminals in order to achieve this:
Revision as of 00:35, 29 June 2018
|Operating System||CentOS 7.4|
|Number of Nodes||1500 nodes (60,000 cores)|
|Ram/Node||188 GiB / 202 GB|
|Cores/Node||40 (80 hyperthreads)|
|Vendor Compilers||icc (C) ifort (fortran) icpc (C++)|
- 1 Specifications
- 2 Using Niagara: Logging in
- 3 Locating your directories
- 4 Data Management
- 5 Loading Software Modules
- 6 Running Commercial Software
- 7 Compiling on Niagara: Example
- 8 Testing
- 9 Submitting jobs
- 9.1 SLURM nomenclature: jobs, nodes, tasks, cpus, cores, threads
- 9.2 Scheduling by Node
- 9.3 Hyperthreading: Logical CPUs vs. cores
- 9.4 Limits
- 9.5 SLURM Accounts
- 9.6 Passing Variables to Job's submission scripts
- 9.7 Email Notification
- 9.8 Example submission script (MPI)
- 9.9 Example submission script (OpenMP)
- 10 Monitoring queued jobs
- 11 Visualization
- 12 Further information
The Niagara cluster is a large cluster of 1500 Lenovo SD350 servers each with 40 Intel "Skylake" cores at 2.4 GHz. The peak performance of the cluster is 3.02 PFlops delivered / 4.6 PFlops theoretical. It is the 53rd fastest supercomputer on the TOP500 list of June 2018.
Each node of the cluster has 188 GiB / 202 GB RAM per node (at least 4 GiB/core for user jobs). Being designed for large parallel workloads, it has a fast interconnect consisting of EDR InfiniBand in a Dragonfly+ topology with Adaptive Routing. The compute nodes are accessed through a queueing system that allows jobs with a minimum of 15 minutes and a maximum of 12 or 24 hours and favours large jobs.
- See the "Intro to Niagara" recording
Using Niagara: Logging in
Those of you new to SciNet and belonging to a group whose primary PI doesn't have a RAC, to gain access to niagara you will need first to follow the old route of requesting a SciNet Consortium Account on the CCDB site.
Otherwise, as with all SciNet and CC (Compute Canada) compute systems, access to Niagara is done via ssh (secure shell) only. Just open a terminal window (e.g. MobaXTerm on Windows), then ssh into the Niagara login nodes with your CC credentials:
$ ssh -Y MYCCUSERNAME@niagara.scinet.utoronto.ca
$ ssh -Y MYCCUSERNAME@niagara.computecanada.ca
- The Niagara login nodes are where you develop, edit, compile, prepare and submit jobs.
- These login nodes are not part of the Niagara compute cluster, but have the same architecture, operating system, and software stack.
- The optional
-Yis needed to open windows from the Niagara command-line onto your local X server.
- To run on Niagara's compute nodes, you must submit a batch job.
If you cannot log in, be sure first to check the System Status on this site's front page.
Locating your directories
home and scratch
You have a home and scratch directory on the system, whose locations will be given in the form
nia-login07:~$ pwd /home/s/scinet/rzon nia-login07:~$ cd $SCRATCH nia-login07:rzon$ pwd /scratch/s/scinet/rzon
NOTE: home is read-only on compute nodes.
project and archive
Users from groups with RAC storage allocation will also have a project and/or archive directory.
NOTE: Currently archive space is available only via HPSS
IMPORTANT: Future-proof your scripts
Use the environment variables (HOME, SCRATCH, PROJECT, ARCHIVE) instead of the actual paths! The paths may change in the future.
Purpose of each file system
/home is intended primarily for individual user files, common software or small datasets used by others in the same group, provided it does not exceed individual quotas. Otherwise you may consider /scratch or /project. /home is read-only on the compute nodes.
/scratch is to be used primarily for temporary or transient files, for all the results of your computations and simulations, or any material that can be easily recreated or reacquired. You may use scratch as well for any intermediate step in your workflow, provided it does not induce too much IO or too many small files on this disk-based storage pool, otherwise you should consider burst buffer (/bb). Once you have your final results, those that you want to keep for the long term, you may migrate them to /project or /archive. /scratch is purged on a regular basis and has no backups.
/project is intended for common group software, large static datasets, or any material very costly to be reacquired or re-generated by the group. Material on /project is expected to be relatively immutable over time. Temporary or transient files should be kept on scratch, not project. High data turnover induces the consumption of a lot of tapes on the TSM backup system, long after this material has been deleted, due to backup retention policies and the extra versions kept of the same file. Users abusing the project file system and using it as scratch will be flagged and contacted. Note that on niagara /project is only available to groups with RAC allocation.
/bb (burst buffer)
/bb is basically a very fast, very high performance alternative to /scratch, made of solid-state drives (SSD). You may request this resource instead, if you anticipate a lot of IO/IOPs (too much for scratch) or when you notice your job is not performing well running on scratch or project because of IO bottlenecks. Keep in mind, we can only offer 232TB for all niagara users at any given time. Once you get your results you may bundle/tarball them and move to scratch, project or archive. /bb is purged very frequently.
/archive is a nearline storage pool, if you want to temporarily offload semi-active material from any of the above file systems. In practice users will offload/recall material as part of their regular workflow, or when they hit their quotas on scratch or project. That material can remain on HPSS for a few months to a few years. Note that on niagara /archive is only available to groups with RAC allocation.
GPFS is a high-performance filesystem which provides rapid reads and writes to large datasets in parallel from many nodes. As a consequence of this design, however, the file system performs quite poorly at accessing data sets which consist of many, small files. For instance, you will find that reading data in from one 16MB file is enormously faster than from 400 40KB files. Such small files are also quite wasteful of space, as the blocksize for the scratch and project filesystems is 16MB. This is something you should keep in mind when planning your input/output strategy for runs on SciNet.
For instance, if you run multi-process jobs, having each process write to a file of its own is not an scalable I/O solution. A directory gets locked by the first process accessing it, so all other processes have to wait for it. Not only has the code just become considerably less parallel, chances are the file system will have a time-out while waiting for your other processes, leading your program to crash mysteriously. Consider using MPI-IO (part of the MPI-2 standard), which allows files to be opened simultaneously by different processes, or using a dedicated process for I/O to which all other processes send their data, and which subsequently writes this data to a single file.
Migration to Niagara
Migration for Existing Users of the GPC
Niagara is replacing the General Purpose Cluster (GPC) and the Tightly Coupled Cluster (TCS) at SciNet. The TCS was decommissioned last fall, and the compute nodes of the GPC were decommissioned on April 21, 2018, while the storage attached to the GPC will be decommissioned on May 30, 2018.
Active GPC Users got access to the new system, Niagara, on April 9, 2018.
Users' home and project folder were last copied over from the GPC to Niagara on April 5th, 2018, except for files whose name start with a period that were in their home directories (these files were never synced).
It is the user's responsibility to copy over data generated on the GPC after April 5th, 2018.
Data stored in scratch has also not been transfered automatically. Users are to clean up their scratch space on the GPC as much as possible (remember it's temporary data!). Then they can transfer what they need using datamover nodes.
To enable this transfer, there will be a short period during which you can have access to Niagara as well as to the GPC storage resources. This period will end on May 30, 2018.
To copy substantial amounts of data (i.e.,more than 10 GB), please use the datamovers of both the GPC (called gpc-logindm01 and gpc-logindm02) and the Niagara datamovers (called nia-dm1 and nia-dm2). For instance, to copy a directory abc from your GPC scratch to your Niagara scratch directory, you can do the following:
$ ssh CCUSERNAME@niagara.computecanada.ca $ ssh nia-dm1 $ scp -r SCINETUSERNAME@gpc-logindm01:\$SCRATCH/abc $SCRATCH/abc
For many users, CCUSERNAME amd SCINETUSERNAME will be the same. Make sure you use the slash (\) before the first $SCRATCH; it cause the value of scratch on the remote node (i.e., here, gpc-logindm01) to be used. Note that the gpc-logindm01 will ask for your SciNet password.
You can also go the other way:
$ ssh SCINETUSERNAME@login.scinet.utoronto.ca $ ssh gpc-logindm01 $ scp -r $SCRATCH/abc CCUSERNAME@nia-dm1:\$SCRATCH/abc
Again, pay attention to the slash in front of the last occurrence of $SCRATCH.
If you are using rsync, we advice to refrain from using the -a flags, and if using cp, refrain from using the -a and -p flags.
For Non-GPC Users
Those of you new to SciNet, but with 2018 RAC allocations on Niagara, will have your accounts created and ready for you to login.
New, non-RAC users: we are still working out the procedure to get access. If you can't wait, for now, you can follow the old route of requesting a SciNet Consortium Account on the CCDB site.
Move amounts less than 10GB through the login nodes.
- Only Niagara login nodes visible from outside SciNet.
- Use scp or rsync to niagara.scinet.utoronto.ca or niagara.computecanada.ca (no difference).
- This will time out for amounts larger than about 10GB.
Move amounts larger than 10GB through the datamover nodes.
- From a Niagara login node, ssh to
- Transfers must originate from this datamover.
- The other side (e.g. your machine) must be reachable from the outside.
- If you do this often, consider using Globus, a web-based tool for data transfer.
Moving data to HPSS/Archive/Nearline using the scheduler.
- HPSS is a tape-based storage solution, and is SciNet's nearline a.k.a. archive facility.
- Storage space on HPSS is allocated through the annual Compute Canada RAC allocation.
Storage and quotas
|location||quota||block size||expiration time||backed up||on login nodes||on compute nodes|
|$HOME||100 GB per user||1 MB||yes||yes||read-only|
|$SCRATCH||25 TB per user (dynamic per group)||16 MB||2 months||no||yes||yes|
|up to 4 users per group||50TB|
|up to 11 users per group||125TB|
|up to 28 users per group||250TB|
|up to 60 users per group||400TB|
|above 60 users per group||500TB|
|$PROJECT||by group allocation||16 MB||yes||yes||yes|
|$ARCHIVE||by group allocation||dual-copy||no||no|
|$BBUFFER||10 TB per user||1 MB||very short||no||yes||yes|
- Inode vs. Space quota (PROJECT and SCRATCH)
- dynamic quota per group (SCRATCH)
- Compute nodes do not have local storage.
- Archive space is on HPSS.
- Backup means a recent snapshot, not a replica of all data or version that ever was.
$BBUFFERstands for the Burst Buffer, a faster parallel storage tier for temporary data.
File/Ownership Management (ACL)
- By default, at SciNet, users within the same group already have read permission to each other's files (not write)
- You may use access control list (ACL) to allow your supervisor (or another user within your group) to manage files for you (i.e., create, move, rename, delete), while still retaining your access and permission as the original owner of the files/directories. You may also let users in other groups or whole other groups access (read, execute) your files using this same mechanism.
- You may use gpfs' native mmputacl and mmgetacl commands. The advantages are that you can set "control" permission and that POSIX or NFS v4 style ACL are supported. You will need first to create a /tmp/supervisor.acl file with the following contents:
user::rwxc group::---- other::---- mask::rwxc user:[owner]:rwxc user:[supervisor]:rwxc group:[othegroup]:r-xc
Then issue the following 2 commands:
1) $ mmputacl -i /tmp/supervisor.acl /project/g/group/[owner] 2) $ mmputacl -d -i /tmp/supervisor.acl /project/g/group/[owner] (every *new* file/directory inside [owner] will inherit [supervisor] ownership by default as well as [owner] ownership, ie, ownership of both by default, for files/directories created by [supervisor]) $ mmgetacl /project/g/group/[owner] (to determine the current ACL attributes) $ mmdelacl -d /project/g/group/[owner] (to remove any previously set ACL) $ mmeditacl /project/g/group/[owner] (to create or change a GPFS access control list) (for this command to work set the EDITOR environment variable: export EDITOR=/usr/bin/vi)
- There is no option to recursively add or remove ACL attributes using a gpfs built-in command to existing files. You'll need to use the -i option as above for each file or directory individually. Here is a sample bash script you may use for that purpose
- mmputacl will not overwrite the original linux group permissions for a directory when copied to another directory already with ACLs, hence the "#effective:r-x" note you may see from time to time with mmgetacf. If you want to give rwx permissions to everyone in your group you should simply rely on the plain unix 'chmod g+rwx' command. You may do that before or after copying the original material to another folder with the ACLs.
- In the case of PROJECT, your group's supervisor will need to set proper ACL to the /project/G/GROUP level in order to let users from other groups access your files.
- ACL's won't let you give away permissions to files or directories that do not belong to you.
- We highly recommend that you never give write permission to other users on the top level of your home directory (/home/G/GROUP/[owner]), since that would seriously compromise your privacy, in addition to disable ssh key authentication, among other things. If necessary, make specific sub-directories under your home directory so that other users can manipulate/access files from those.
Recursive ACL script
You may use/adapt this sample bash script to recursively add or remove ACL attributes using gpfs built-in commands
Courtesy of Agata Disks (http://csngwinfo.in2p3.fr/mediawiki/index.php/GPFS_ACL)
Scratch Disk Purging Policy
In order to ensure that there is always significant space available for running jobs we automatically delete files in /scratch that have not been accessed or modified for more than 2 months by the actual deletion day on the 15th of each month. Note that we recently changed the cut out reference to the MostRecentOf(atime,ctime). This policy is subject to revision depending on its effectiveness. More details about the purging process and how users can check if their files will be deleted follows. If you have files scheduled for deletion you should move them to more permanent locations such as your departmental server or your /project space or into HPSS (for PIs who have either been allocated storage space by the RAC on project or HPSS).
On the first of each month, a list of files scheduled for purging is produced, and an email notification is sent to each user on that list. You also get a notification on the shell every time your login to Niagara. Furthermore, at/or about the 12th of each month a 2nd scan produces a more current assessment and another email notification is sent. This way users can double check that they have indeed taken care of all the files they needed to relocate before the purging deadline. Those files will be automatically deleted on the 15th of the same month unless they have been accessed or relocated in the interim. If you have files scheduled for deletion then they will be listed in a file in /scratch/t/todelete/current, which has your userid and groupid in the filename. For example, if user xxyz wants to check if they have files scheduled for deletion they can issue the following command on a system which mounts /scratch (e.g. a scinet login node): ls -1 /scratch/t/todelete/current |grep xxyz. In the example below, the name of this file indicates that user xxyz is part of group abc, has 9,560 files scheduled for deletion and they take up 1.0TB of space:
[xxyz@nia-login03 ~]$ ls -1 /scratch/t/todelete/current |grep xxyz -rw-r----- 1 xxyz root 1733059 Jan 17 11:46 3110001___xxyz_______abc_________1.00T_____9560files
The file itself contains a list of all files scheduled for deletion (in the last column) and can be viewed with standard commands like more/less/cat - e.g. more /scratch/t/todelete/current/3110001___xxyz_______abc_________1.00T_____9560files
Similarly, you can also verify all other users on your group by using the ls command with grep on your group. For example: ls -1 /scratch/t/todelete/current |grep abc. That will list all other users in the same group that xxyz is part of, and have files to be purged on the 15th. Members of the same group have access to each other's contents.
NOTE: Preparing these assessments takes several hours. If you change the access/modification time of a file in the interim, that will not be detected until the next cycle. A way for you to get immediate feedback is to use the 'ls -lu' command on the file to verify the ctime and 'ls -lc' for the mtime. If the file atime/ctime has been updated in the meantime, coming the purging date on the 15th it will no longer be deleted.
How much Disk Space Do I have left?
The /scinet/niagara/bin/diskUsage command, available on the login nodes and datamovers, provides information in a number of ways on the home, scratch, project and archive file systems. For instance, how much disk space is being used by yourself and your group (with the -a option), or how much your usage has changed over a certain period ("delta information") or you may generate plots of your usage over time. Please see the usage help below for more details.
Usage: diskUsage [-h|-?| [-a] [-u <user>] -h|-?: help -a: list usages of all members on the group -u <user>: as another user on your group
Did you know that you can check which of your directories have more than 1000 files with the /scinet/niagara/bin/topUserDirOver1000list command and which have more than 1GB of material with the /scinet/niagara/bin/topUserDirOver1GBlist command?
- information on usage and quota is only updated every 3 hours!
- $HOME, $SCRATCH, and $PROJECT all use the parallel file system called GPFS.
- Your files can be seen on all Niagara login and compute nodes.
- GPFS is a high-performance file system which provides rapid reads and writes to large data sets in parallel from many nodes.
- But accessing data sets which consist of many, small files leads to poor performance.
- Avoid reading and writing lots of small amounts of data to disk.
- Many small files on the system would waste space and would be slower to access, read and write.
- Write data out in binary. Faster and takes less space.
- The Burst Buffer is better for i/o heavy jobs and to speed up checkpoints.
Loading Software Modules
Other than essentials, all installed software is made available using module commands. These modules set environment variables (PATH, etc.) This allows multiple, conflicting versions of a given package to be available. module spider shows the available software.
nia-login07:~$ module spider --------------------------------------------------- The following is a list of the modules currently av --------------------------------------------------- CCEnv: CCEnv NiaEnv: NiaEnv/2018a anaconda2: anaconda2/5.1.0 anaconda3: anaconda3/5.1.0 autotools: autotools/2017 autoconf, automake, and libtool boost: boost/1.66.0 cfitsio: cfitsio/3.430 cmake: cmake/3.10.2 cmake/3.10.3 ...
Common module subcommands are:
module load <module-name>
use particular software
remove currently loaded modules
module spider <module-name>)
list available software packages
list loadable software packages
list loaded modules
On Niagara, there are really two software stacks:
A Niagara software stack tuned and compiled for this machine. This stack is available by default, but if not, can be reloaded with
module load NiaEnv
module load CCEnv
If you want the same default modules loaded as on Cedar and Graham, then afterwards also
module load StdEnv.
*Env modules are sticky; remove them by
Tips for loading software
We advise against loading modules in your .bashrc.
This could lead to very confusing behaviour under certain circumstances.
The default .bashrc and .bash_profile files on Niagara can be found here
- <p>Instead, load modules by hand when needed, or by sourcing a separate script.
Load run-specific modules inside your job submission script.
Short names give default versions; e.g.
It is usually better to be explicit about the versions, for future reproducibility.
ml → module list ml NAME → module load NAME # if NAME is an existing module ml X → module X
- Modules sometimes require other modules to be loaded first.
Solve these dependencies by using
Oddly named, the module subcommand spider is the search-and-advice facility for modules.
Suppose one wanted to load the openmpi module. Upon trying to load the module, one may get the following message:
nia-login07:~$ module load openmpi Lmod has detected the error: These module(s) exist but cannot be loaded as requested: "openmpi" Try: "module spider openmpi" to see how to load the module(s).
So while that fails, following the advice that the command outputs, the next command would be:
nia-login07:~$ module spider openmpi ------------------------------------------------------------------------------------------------------ openmpi: ------------------------------------------------------------------------------------------------------ Versions: openmpi/2.1.3 openmpi/3.0.1 openmpi/3.1.0 ------------------------------------------------------------------------------------------------------ For detailed information about a specific "openmpi" module (including how to load the modules) use the module s full name. For example: $ module spider openmpi/3.1.0 ------------------------------------------------------------------------------------------------------
So this gives just more detailed suggestions on using the spider command. Following the advice again, one would type:
nia-login07:~$ module spider openmpi/3.1.0 ------------------------------------------------------------------------------------------------------ openmpi: openmpi/3.1.0 ------------------------------------------------------------------------------------------------------ You will need to load all module(s) on any one of the lines below before the "openmpi/3.1.0" module is available to load. NiaEnv/2018a gcc/7.3.0 NiaEnv/2018a intel/2018.2
These are concrete instructions on how to load this particular openmpi module. Following these leads to a successful loading of the module.
nia-login07:~$ module load NiaEnv/2018a intel/2018.2 # note: NiaEnv is usually already loaded nia-login07:~$ module load openmpi/3.1.0
nia-login07:~$ module list Currently Loaded Modules: 1) NiaEnv/2018a (S) 2) intel/2018.2 3) openmpi/3.1.0 Where: S: Module is Sticky, requires --force to unload or purge
Running Commercial Software
- Possibly, but you have to bring your own license for it.
- SciNet and Compute Canada have an extremely large and broad user base of thousands of users, so we cannot provide licenses for everyone's favorite software.
- Thus, the only commercial software installed on Niagara is software that can benefit everyone: Compilers, math libraries and debuggers.
- That means no Matlab, Gaussian, IDL,
- Open source alternatives like Octave, Python, R are available.
- We are happy to help you to install commercial software for which you have a license.
- In some cases, if you have a license, you can use software in the Compute Canada stack.
Compiling on Niagara: Example
Suppose one want to compile an application from two c source files, appl.c and module.c, which use the Gnu Scientific Library (GSL). This is an example of how this would be done:
nia-login07:~$ module list Currently Loaded Modules: 1) NiaEnv/2018a (S) Where: S: Module is Sticky, requires --force to unload or purge nia-login07:~$ module load intel/2018.2 gsl/2.4 nia-login07:~$ ls appl.c module.c nia-login07:~$ icc -c -O3 -xHost -o appl.o appl.c nia-login07:~$ icc -c -O3 -xHost -o module.o module.c nia-login07:~$ icc -o appl module.o appl.o -lgsl -mkl nia-login07:~$ ./appl
- The optimization flags -O3 -xHost allow the Intel compiler to use instructions specific to the architecture CPU that is present (instead of for more generic x86_64 CPUs).
- The GSL requires a cblas implementation, for is contained in the Intel Math Kernel Library (MKL). Linking with this library is easy when using the intel compiler, it just requires the -mkl flags.
- If compiling with gcc, the optimization flags would be -O3 -march=native. For the way to link with the MKL, it is suggested to use the MKL link line advisor.
You really should test your code before you submit it to the cluster to know if your code is correct and what kind of resources you need.
Small test jobs can be run on the login nodes.
Rule of thumb: couple of minutes, taking at most about 1-2GB of memory, couple of cores.
You can run the the ddt debugger on the login nodes after
module load ddt.
Short tests that do not fit on a login node, or for which you need a dedicated node, request an
interactive debug job with the salloc command
nia-login07:~$ salloc -pdebug --nodes N --time=1:00:00
where N is the number of nodes. The duration of your interactive debug session can be at most one hour, can use at most 4 nodes, and each user can only have one such session at a time.
Alternatively, on Niagara, you can use the command
nia-login07:~$ debugjob N
where N is the number of nodes, If N=1, this gives an interactive session one 1 hour, when N=4 (the maximum), it gives you 30 minutes.
Finally, if your debugjob process takes more than 1 hour, you can request an interactive job from the regular queue. Note, however, that this may take some time to run, since it will be part of the regular queue, and will be run when the scheduler decides.
nia-login07:~$ salloc --nodes N --time=M:00:00
where N is again the number of nodes, and M is the number of hours you wish the job to run.
Testing with Graphics: X-forwarding
If you need to use graphics while testing your code, e.g. when using a debugger such as DDT or DDD, you have the following options:
- You can use the
debugjobcommand which automatically provides X-forwarding support.
$ ssh niagara.scinet.utoronto.ca -X USER@nia-login07:~$ debugjob debugjob: Requesting 1 nodes for 60 minutes xalloc: Granted job allocation 189857 xalloc: Waiting for resource configuration xalloc: Nodes nia0030 are ready for job [USER@nia1265 ~]$
debugjobis not suitable for your case due to the limitations either on time or resources (see above [Testing]), then you have to follow these steps: You will need two terminals in order to achieve this:
- In the 1st terminal
- ssh to
niagara.scinet.utoronto.caand issue your
- wait until your resources are allocated and you are assigned the nodes
- take note of the node where you are logged to, ie. the head node, let's say
$ ssh niagara.scinet.utoronto.ca USER@nia-login07:~$ salloc --nodes 5 --time=2:00:00 .salloc: Granted job allocation 141862 .salloc: Waiting for resource configuration .salloc: Nodes nia1265 are ready for job [USER@nia1265 ~]$
- ssh to
- On the second terminal:
- ssh into
niagara.scinet.utoronto.canow using the
-Xflag in the ssh command
- after that
ssh -X niaWXYZ, ie. you will ssh carrying on the '-X' flag into the head node of the job
- in the
niaWXYZyou should be able to use graphics and should be redirected by x-forwarding to your local terminal
ssh niagara.scinet.utoronto.ca -X USER@nia-login07:~$ ssh -X nia1265 [USER@nia1265 ~]$ xclock ## just an example to test the graphics, a clock should pop up, close it to exit [USER@nia1265 ~]$ module load ddt ## load corresponding modules, eg. for DDT [USER@nia1265 ~]$ ddt ## launch DDT, the GUI should appear in your screen
- ssh into
- In the 1st terminal
- If you are using ssh from a Windows machine, you need to have an X-server, a good option is to use MobaXterm, that already brings an X-server included.
- If you are in Mac OS, substitute -X by -Y
- Instead of using two terminals, you could just use
screento request the resources and then detach the session and ssh into the head node directly.
Niagara uses SLURM as its job scheduler.
You submit jobs from a login node by passing a script to the sbatch command:
nia-login07:~$ sbatch jobscript.sh
This puts the job in the queue. It will run on the compute nodes in due course.
Jobs will run under their group's RRG allocation, or, if the group has none, under a RAS allocation (previously called `default' allocation).
Keep in mind:
Scheduling is by node, so in multiples of 40 cores.
For users with an allocation, the maximum walltime is 24 hours. For those without an allocation, the maximum walltime is 12 hours.
Jobs must write to your scratch or project directory (home is read-only on compute nodes).
Compute nodes have no internet access.
Download data you need beforehand on a login node.
SLURM nomenclature: jobs, nodes, tasks, cpus, cores, threads
SLURM, which is the job scheduler used on Niagara, has a somewhat different way of referring to things like mpi processes and threads tasks. The SLURM nomenclature is reflected in the names of scheduler option (i.e., resource requests). SLURM strictly enforces those requests, so it is important to get this right.
|term||meaning||SLURM term||related scheduler options|
|job||scheduled piece of work for which specific resources were requested.||job||sbatch, salloc|
|node||basic computing component with several cores (40 for Niagara) that share memory||node||--nodes -N|
|mpi process||one of a group of running programs using Message Passing Interface for parallel computing||task||--ntasks -n --ntasks-per-node|
|core or physical cpu||A fully functional independent physical execution unit.||-||-|
|logical cpu||An execution unit that the operating system can assign work to. Operating systems can be configured to overload physical cores with multiple logical cpus using hyperthreading.||cpu||--ncpus-per-task|
|thread||one of possibly multiple simultaneous execution paths within a program, which can share memory.||-||--ncpus-per-task and OMP_NUM_THREADS|
|hyperthread||a thread run in a collection of threads that is larger than the number of physical cores.||-||-|
Scheduling by Node
- On many systems that use SLURM, the scheduler will deduce from the specifications of the number of tasks and the number of cpus-per-node, what resources should be allocated. On Niagara, this is a bit different.
All job resource requests on Niagara are scheduled as a multiple of nodes.
- The nodes that your jobs run on are exclusively yours.
- No other users are running anything on them.
- You can ssh into them to see how things are going.
Whatever your requests to the scheduler, it will always be translated into a multiple of nodes allocated to your job.
Memory requests to the scheduler are of no use. Your job always gets N x 202GB of RAM, where N is the number of nodes.
You should try to use all the cores on the nodes allocated to your job. Since there are 40 cores per node, your job should use N x 40 cores. If this is not the case, we will be contacted you to help you optimize your workflow.
Hyperthreading: Logical CPUs vs. cores
Hyperthreading, a technology that leverages more of the physical hardware by pretending there are twice as many logical cores than real once, is enabled on Niagara. So the OS and scheduler see 80 logical cpus.
Using 80 logical cpus vs. 40 real cores typically gives about a 5-10% speedup (Your Mileage May Vary).
Because Niagara is scheduled by node, hyperthreading is actually fairly easy to use:
- Ask for a certain number of nodes N for your jobs.
- You know that you get 40xN cores, so you will use (at least) a total of 40xN mpi processes or threads. (mpirun, srun, and the OS will automaticallly spread these over the real cores)
- But you should also test if running 80xN mpi processes or threads gives you any speedup.
- Regardless, your usage will be counted as 40xNx(walltime in years).
There are limits to the size and duration of your jobs, the number of jobs you can run and the number of jobs you can have queued. It matters whether a user is part of a group with a Resources for Research Group allocation or not. It also matters in which 'partition' the jobs runs. 'Partitions' are SLURM-speak for use cases. You specify the partition with the -p parameter to sbatch or salloc, but if you do not specify one, your job will run in the compute partition, which is the most common case.
|Usage||Partition||Running jobs||Submitted jobs (incl. running)||Min. size of jobs||Max. size of jobs||Min. walltime||Max. walltime|
|Compute jobs with an allocation||compute||50||1000||1 node (40 cores)||1000 nodes (40000 cores)||15 minutes||24 hours|
|Compute jobs without allocation ("default")||compute||50||200||1 node (40 cores)||20 nodes (800 cores)||15 minutes||12 hours|
|Testing or troubleshooting||debug||1||1||1 node (40 cores)||4 nodes (160 cores)||N/A||1 hour|
|Archiving or retrieving data in HPSS||archivelong||2 per user (max 5 total)||10 per user||N/A||N/A||15 minutes||72 hours|
|Inspecting archived data, small archival actions in HPSS||archiveshort||2 per user||10 per user||N/A||N/A||15 minutes||1 hour|
Within these limits, jobs will still have to wait in the queue. The waiting time depends on many factors such as the allocation amount, how much allocation was used in the recent past, the number of nodes and the walltime, and how many other jobs are waiting in the queue.
To be able to prioritise jobs based on groups and allocations, the SLURM scheduler uses the concept of accounts. Each group that has a Resource for Research Groups (RRG) or Research Platforms and Portals (RPP) allocation (awarded through an annual competition by Compute Canada) has an account that starts with rrg- or rpp-. SLURM assigns a 'fairshare' priority to these accounts based on the size of the award in core-years. Groups without an RRG or RPP can use Niagara using a so-called Rapid Access Service (RAS), and have an account that starts with def-.
On Niagara, most users will only ever use one account, and those users do not need to specify the account to SLURM. However, users that are part of collaborations may be able to use multiple accounts, i.e., that of their sponsor and that of their collaborator, but this mean that they need to select the right account when running jobs.
To select the account, just add
#SBATCH -A [account]
to the job scripts, or use the -A [account] to salloc or debugjob.
To see which accounts you have access to, or what their names are, use the command
Passing Variables to Job's submission scripts
It is possible to pass values through environment variables into your SLURM submission scripts. For doing so with already defined variables in your shell, just add the following directive in the submission script,
and you will have access to any predefined environment variable.
A better way is to specify explicitly which variables you want to pass into the submision script,
sbatch --export=i=15,j='test' jobscript.sbatch
You can even set the job name and output files using environment variables, eg.
i="simulation" j=14 sbatch --job-name=$i.$j.run --output=$i.$j.out --export=i=$i,j=$j jobscript.sbatch
(The latter only works on the command line; you cannot use environment variables in #SBATCH lines in the job script.)
Command line arguments:
Command line arguments can also be used in the same way as command line argument for shell scripts. All command line arguments given to sbatch that follow after the job script name, will be passed to the job script. In fact, SLURM will not look at any of these arguments, so you must place all sbatch arguments before the script name, e.g.:
sbatch -p debug jobscript.sbatch FirstArgument SecondArgument ...
In this example, -p debug is interpreted by SLURM, while in your submission script you can access FirstArgument, SecondArgument, etc., by referring to
$1, $2, ....
Email notification works, but you need to add the email address and type of notification you may want to receive in your submission script, eg.
#SBATCH --mail-user=YOUR.email.ADDRESS #SBATCH --mail-type=ALL
The sbatch man page (type man sbatch on Niagara) explains all possible mail-types.
Example submission script (MPI)
#!/bin/bash #SBATCH --nodes=8 #SBATCH --ntasks=320 #SBATCH --time=1:00:00 #SBATCH --job-name mpi_job #SBATCH --output=mpi_output_%j.txt cd $SLURM_SUBMIT_DIR module load intel/2018.2 module load openmpi/3.1.0 mpirun ./mpi_example # or "srun ./mpi_example"
Submit this script with the command:
nia-login07:~$ sbatch mpi_job.sh
First line indicates that this is a bash script.
Lines starting with
#SBATCHgo to SLURM.
sbatch reads these lines as a job request (which it gives the name
In this case, SLURM looks for 8 nodes with 40 cores on which to run 320 tasks, for 1 hour.
Note that the mpifun flag "--ppn" (processors per node) is ignored.
Once it found such a node, it runs the script:
- Change to the submission directory;
- Loads modules;
- Runs the
- To use hyperthreading, just change --ntasks=320 to --ntasks=640, and add --bind-to none to the mpirun command (the latter is necessary for OpenMPI only, not when using IntelMPI).
Example submission script (OpenMP)
#!/bin/bash #SBATCH --nodes=1 #SBATCH --cpus-per-task=40 #SBATCH --time=1:00:00 #SBATCH --job-name openmp_job #SBATCH --output=openmp_output_%j.txt cd $SLURM_SUBMIT_DIR module load intel/2018.2 export OMP_NUM_THREADS=$SLURM_CPUS_PER_TASK ./openmp_example # or "srun ./openmp_example".
Submit this script with the command:
nia-login07:~$ sbatch openmp_job.sh
- First line indicates that this is a bash script.
- Lines starting with
#SBATCHgo to SLURM.
- sbatch reads these lines as a job request (which it gives the name
- In this case, SLURM looks for one node with 40 cores to be run inside one task, for 1 hour.
- Once it found such a node, it runs the script:
- Change to the submission directory;
- Loads modules;
- Sets an environment variable;
- Runs the
- To use hyperthreading, just change
Monitoring queued jobs
Once the job is incorporated into the queue, there are some command you can use to monitor its progress.
sqc(a caching version of squeue) to show the job queue (
squeue -u $USERfor just your jobs);
qsumshows a summary of qudue by user
squeue -j JOBIDto get information on a specific job
scontrol show job JOBID, which is more verbose).
squeue --start -j JOBIDto get an estimate for when a job will run; these tend not to be very accurate predictions.
scancel -i JOBIDto cancel the job.
sinfo -pcomputeto look at available nodes.
jobperf JOBIDto get an instantaneous view of the cpu and memory usage of the nodes of the job while it is running.
sacctto get information on your recent jobs.
More utilities like those that were available on the GPC are under development.
Information about how to use visualization tools on Niagara is available on Visualization page.
- SciNet: https://www.scinet.utoronto.ca
- Niagara: https://docs.computecanada.ca/wiki/niagara
- System Status: https://docs.scinet.utoronto.ca/index.php/Main_Page
- Training: https://support.scinet.utoronto.ca/education